Experimental Study on Comparison of Cooling Effectiveness Between Steam and Air for a Gas Turbine Nozzle Guide Vane
Wei Wang,Jianmin Gao,Xiaojun Shi,Liang Xu,Zhao Wang,Fumin Chen
DOI: https://doi.org/10.1115/gt2012-68691
2012-01-01
Abstract:An experimental investigation of the cooling performance for a gas turbine vane with internal passages is conducted on a linear turbine cascade consisting of three nozzle guide vanes with a chord length of 126mm and a blade height of 83 mm. Measurements of temperature and static pressure distribution are implemented on the center guide vane, which is internally cooled by air or steam flowing radially through five smooth channels. The main objective of this investigation is to receive more information on the temperature of vane surface, and to compare the cooling effectiveness between air and superheated steam. The experiments are performed for a variety of exit Mach numbers, exit Reynolds number, coolant-to-mainstream mass flow ratio, and coolant-to-mainstream temperatures ratio. The experimental results show, that at coolant-to-mainstream mass flow ratio 0.08 and coolant-to-mainstream temperatures ratio 0.61, the average surface temperature of steam cooled vane decreases about 25% and the corresponding average cooling effectiveness is 52%, while for the air cooled vane, it is 18% and 42%, respectively. Therefore the coolant steam has much better cooling performance than air. Furthermore, the cooling effectiveness at the middle chord region of vane is much higher than that at the leading and trailing region, as is expected. Consequently, this leads to great temperature gradient and thermal stresses at the leading and trailing region, where the internal convective cooling method has insufficient cooling ability. Therefore, besides convective cooling method, more complicated cooling configuration may be necessitated.