Abstract:Cement production emits a large amount of CO 2 into the atmosphere and consumes significant mineral resources, necessitating urgent green transformation in this traditional industry. To address carbon emissions in the building materials sector and effectively utilize industrial solid waste, this study presents the preparation of geopolymer mortar using a ternary mixture of fly ash (FA), slag (GGBS) and red mud (RM), making full use of the advantages of each component to optimize the mix proportion. The mix proportions are determined using the simplex-centroid experimental design method, with NaOH concentration (8 M, 10 M, 12 M) as the independent variable, aiming to meet multi-objective performance requirements including fluidity, setting time, flexural strength, and compressive strength. The microstructure and composition of hydration products are examined through scanning electron microscopy (SEM) and X-ray diffraction (XRD). Finally, the optimal mix proportion range is proposed. Results indicate that: (1) When the concentration of NaOH increases, the setting time is shortened, and the mechanical properties first increase and then decrease. The optimal alkali concentration is 10 mol/L. (2) RM and FA exhibit similar effects on mechanical properties, suggesting RM can replace FA in geopolymer material preparation. Besides, RM significantly reduces fluidity. (3) GGBS enhances mechanical properties and shortens setting time. The increase of GGBS content provides more CaO for the matrix and generates more compact C-S-H gel, and thus, the flexural strength and compressive strength of the geopolymer mortar are improved. When GGBS blending amount is 50 % and NaOH is 10 M, the flexural strength and compressive strength of mortar can reach 15.66 MPa and 69.06 MPa, respectively. (4) The simplex-centroid experimental design method provides a mix proportion design method that can meet the requirements of multiple properties at the same time.

Study on Factors Affecting the Mechanical Properties of Dry Mixing CDG Based Geopolymer

Experimental Study on the Effects of Calcium-rich Materials on the Early Compressive Strength of Completely Decomposed Granite (CDG) Base-geopolymer

Mechanical Properties of the Wet Mixed Geopolymer Concrete Based on CDG and Slag Cementitious Materials in Ambient Curing Temperature

Study on Improving Measures of Mechanical Properties of Geopolymer Materials and Its Effect on CO2 Emission

Green Synthesis and Structural Characterization of Completely Decomposed Granite (CDG) Based Geopolymer

Compressive Strength and Chloride Resistance of Slag/Metakaolin-Based Ultra-High-Performance Geopolymer Concrete.

Effect of Nano-Tio2 Content on the Flexural Strength and Compressive Strength of Dry-Mixing CDG-Slag Based Geopolymer Paste

Study on the Reinforced Properties of Geopolymer Fibers with a Sustainable Development Role

Compressive Strength Performance of Geopolymer Paste Derived from Completely Decomposed Granite (cdg) and Partial Fly Ash Replacement

Experimental investigation on the mechanical performance and microscopic characterization of desulfurization gypsum-reinforced ternary geopolymer

Research on mix design and mechanical performances of MK-GGBFS based geopolymer pastes using central composite design method

Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand

Latest Progress of Mechanical Properties of Geopolymer Concrete at Elevated Temperature

Interfacial Behavior of Slag, Fly Ash, and Red Mud-Based Geopolymer Mortar with Concrete Substrate: Mechanical Properties and Microstructure

Compressive strength of fly ash based geopolymer utilizing waste completely decomposed granite

Effect of composite activators on mechanical properties, hydration activity and microstructure of red mud-based geopolymer

Study the Mechanical Properties of Geopolymer under Different Curing Conditions

Study on the Mechanical Properties, Microstructure and Hydration Mechanism of Phosphogypsum-Based Geopolymer Cement with Added Micron-Sized Silica Particles

Preparation and performance optimization of fly ash- slag- red mud based geopolymer mortar: Simplex-centroid experimental design method

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

The Influence Mechanism of Molar Ratio on the Performance of Phosphogypsum-Modified Geopolymer Material