Abstract:The fundamental mechanism underlying the formation of brazed joints involves the diffusion of elements between the base metal (BM) and the brazing filler metal (FM). The formation of brittle compounds in FM during the brazing process frequently results in a significant deterioration of the mechanical properties of the brazed joints. Ni and Cu elements exhibit infinite solubility, and the incorporation of Cu element results in a decrease in the liquidus temperature of FM, thereby enhancing its surface wettability on the BM. The present investigation involves the preparation of as-cast and amorphous FMs with varying Cu element concentrations to examine their material properties, such as weldability, wettability, thermophysical behavior, and creep resistance. The thermophysical and mechanical properties of the nickel-based filler metal BNi-2 were evaluated using the JMatPro software for material thermodynamic simulation and compared with data obtained from existing literatures. An analysis is conducted on the creep properties of a novel FM comprising of Ni, Cr, Fe, Si, B, and Cu. The results suggest that the thermophysical properties of BNi-2 filler are minimally impacted by the presence of Cr (6-8 wt %), Fe (2.5-3.5 wt%), Si (4-5 wt%), and B (2.75-3.5 wt%). Furthermore, alterations in the composition of Si and B elements have a significant impact on the distribution of gamma and gamma ' phases, consequently influencing the creep properties of the material. At 25 degrees C, the equilibrium phase of BNi-2 with different Cu contents indicates a gradual decrease in the content of gamma phase, while the content of gamma ' and Cu-Ni phases increases with an increase in Cu content. The BNi-2 filler with 3 % Cu exhibits the most favorable properties in terms of steady creep rate and fracture life compared to other fillers. This is attributed to the competitive equilibrium between the gamma phase and Cu-Ni phase. The addition of 6 % Cu element results in the optimal wettability of the filler metal and creep resistance of the brazed joints. It is also observed that as the concentration of Cu reaches 9 %, there is a gradual increase in the FeB phase, a rise in the proportion of brittle compounds, and a decline in the amorphous forming ability.

Study on Element Diffusion Behaviour of Vacuum-Furnace Brazing 316 L/BNi-2 Joints Based on Boltzmann-Matano Model

Experimental Investigation on the Kinetic Parameters of Diffusion Component for Vacuum Brazing SS316L/BNi-2/SS316L Joint

Diffusion-Based Analytical Modeling of Brazing Stainless Steel with Bni-2

Effects of Element Diffusion on Microstructure Evolution and Residual Stresses in a Brazed Joint: Experimental and Numerical Modeling

Numerical solutions of diffusion-controlled migrating interface problems for studying brazing SS304/BNi-2/SS304 joint

Effect of Temperature on Metallurgical Reactions and Microstructure Evolution of 316L/bni-2 Brazed Joints

Molecular Dynamics Simulation of High-Nitrogen Stainless Steel Brazed by AgCuNi Filler Metal

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Phase Diagram-Guided Composition Design and Property Investigation of Ni-based Filler Metals

Properties of the Joints Bonded by Transformation/Diffusion Brazing (t/db) and Diffusion Behaviours of the Major Elements

Microstructure characteristic of SS304/BNi-2/SS304 butt joint by high temperature brazing

Fracture Mechanism of 316L/bni-2 Brazed Joints Using Experiment and Microstructure-Based Model

Microstructure and Mechanical Properties of Ti-Based Amorphous Solder Vacuum Brazing Joint for Stainless Steel

Vacuum Brazing of Ti6Al4V Alloy to 316L Stainless Steel Using a Ti-Cu-based Amorphous Filler Metal

Microstructure and Electrochemical Corrosion Properties of 316L Stainless Steel Joints Brazed with BNi5

Study on Vacuum Brazing Process of 1Cr18Ni9Ti and T2 Dissimilar Materials Based on BNi76CrP Powder Filler Metal

Vacuum Brazing Effect on the Interlayer Failure Behavior of TiAl/GH3536 Hetero-Thin-walled Structure with BNi-2 Interlayer

Micro Structure and Mechanical Properties of Vacuum Brazed Martensitic Stainless Steel/tin Bronze by Ag-based Alloy

Analysis of transformation-diffusion brazed joint

Microstructure and Mechanical Property of Zr/316L Brazed Joints by Zr–Cu–Fe Amorphous Filler

Finite Element Analysis of Residual Stresses and Thermal Deformation for Brazing Plate-Fin Structure