Abstract:In this paper, in-situ synthesized titanium matrix composites (TMCs) reinforced with TiB whisker plus La2O3 particle were successfully fabricated by the laser beam welding (LBW) process with a Nd:YAG laser source. The evolution behavior of TiB whisker was investigated during laser welding. Optical microscope (OM). X-ray diffractomctry (XRD) analysis, scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) were used to analyze the phase, distribution and morphology characteristics of TiB whisker reinforcements in the laser weld seam, and the interface between TiB whiskers (or La2O3 particles) and titanium matrix was also discussed. The research results show that TiB whiskers are still retained in the weld, and no harmful substances are found. Compared with the base metal, TiB whiskers arc significantly refined and redistribute at 13 grain boundaries, a novel network structure forms in the fusion zone and the heat-affected zone near the fusion line, which is due to higher heat input of weld thermal cycle. Relatively only some TiB whiskers in the heat-affected zone far away from the fusion line change their sizes through intensified diffusion of boron because of much lower heat input, and TiB whiskers near the base metal exhibit no changes and similar morphological features with that in the base metal. Further TEM examination proves that interfaces between the reinforcements and the titanium matrix are very clean, and TiB whiskers maintain good bonding relationship with the matrix. No any interfacial reaction is observed, and it explains that interfacial microstructures between the reinforcements and the matrix are very stable during welding, which is beneficial to the mechanical properties of laser welded joints.

Evilution Behavior Of Tib Whisker During Laser Welding In-Situ Synthesized Tib/Ti Composites

Microstructural Evolutions of In-situ TiB Whisker Reinforcement during Laser Welding TiB/Ti Composites

IN SITU TiBW/Ti COMPOSITES WITH A NOVEL QUASI- CONTINUOUS NETWORK REINFORCEMENT ARCHITECTURE

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

Evolution Behavior of Tib2 Particles During Laser Welding on Aluminum Metal Matrix Composites Reinforced with Particles

Reinforcement behavior in laser welding of A356/TiB 2p MMCs

Reinforcement Behavior in Laser Welding of A356/TiB2p MMCs

Microstructures and Mechanical Properties in Laser Beam Welds of Titanium Matrix Composites

Fabrication of TiB whiskers reinforced Ti6242 matrix composites by direct laser deposition: Powder preparation, microstructure and mechanical property

Precipitation and Distribution Behavior of in Situ-Formed TiB Whiskers in Ti64 Composites Fabricated by Selective Laser Melting

Analysis of the Microstructure and Mechanical Properties of TiBw/Ti-6Al-4V Ti Matrix Composite Joint Fabricated Using TiCuNiZr Amorphous Brazing Filler Metal

The Mechanical Behavior Dependence on the TiB Whisker Realignment During Hot-Working in Titanium Matrix Composites

An innovative TiB whisker architecture of titanium matrix composite devised by scanning electron beam remodeling

Improving the Strength of Brazed Joints with in Situ Synthesized TiB Whiskers

Laser Welding of In-Situ Particulate Reinforced Aluminum Matrix Composites

Effect of in Situ Synthesized TiB Whisker on Microstructure and Mechanical Properties of Carbon–carbon Composite and TiBw/Ti–6Al–4V Composite Joint

Microstructural Evolution and Growth/degradation Behavior of in Situ TiB Whiskers in ZrB2-SiC Joints Using Ti/Ni/Ti Filler

Effect of TiB Whiskers Orientation on Mechanical Properties in an <I>In Situ</I> TiB/Ti-1100 Composite

Formation evolution and strengthening of quasi-continuous network like TiB whiskers in the in-situ TiBw/TC21 matrix composites