Abstract:Thermal and simultaneous thermal and gamma radiation aging experiments were conducted on an industry grade cross-linked polyethylene (XLPE) cable insulation material, which is a composite material with XLPE as polymer matrix and various additives and fillers. Reverse engineering was conducted to identify and quantify the material composition given that this information was not revealed by the cable manufacture. Samples were then aged at temperatures of 60, 90, and 115 °C, exposed to gamma radiation for total doses of 0 to 324 kGy, and at dose rates of 0 to 540 Gy/h. Aging mechanisms were studied using various materials characterization techniques including pyrolysis gas chromatography mass spectrometry (Py-GCMS), differential scanning calorimetry (DSC), nuclear magnetic resonance spectroscopy (NMR), and gel-fraction tests. Results show that the flame-retardant components were decomposed into smaller molecules when the material was exposed to gamma radiation, while no changes were observed when the samples were aged thermally without gamma radiation. With exposure to gamma radiation, the crystalline phase of the XLPE were damaged by gamma radiation introducing defects in the crystals, resulting in smaller and less perfect crystals. The dominance of chain scission or chain reformation process largely depends on the chain mobility, which is decided by the aging temperature. Chain scission was seen to dominate when the material was exposed to gamma radiation at 60 °C. Chain cross-linking slightly dominated when the material was exposed to gamma radiation at 90 °C and became more dominant with exposure to gamma radiation at 115 °C. No significant change to the XLPE polymer matrix was observed when the samples were exposed to thermal aging without gamma radiation. Antioxidant is more effective in protecting the XLPE polymer matrix under thermal aging, but less effective with sample exposure to gamma radiation.

Gamma Irradiation Aging Of Glass Fiber Reinforced Epoxy Matrix Composite

Effect of Irradiation Grafting Epoxy on Surface Characteristics of Carbon Fibers and Mechanical Properties of Composites

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

Simultaneous aging of DGEBA/MeHHPA epoxy resin under thermal heating and gamma irradiation up to 1000 kGy

Influence of accelerated aging on mechanical properties and aging behavior of glass fiber reinforced pipe

Effect of Gamma-ray Irradiation on Ageing of LDPE Micro/Nanocomposites Estimated by DCIC Method

Γ-Ray Irradiation Stability and Damage Mechanism of Glycidyl Amine Epoxy Resin

Effects of γ irradiation on the structure, physical and mechanical properties of a series of tetrafunctional epoxies modified DGEBA/DDS

Degradation behavior and ageing mechanism of E-glass fiber reinforced epoxy resin composite pipes under accelerated thermal ageing conditions

Influence of Gamma Irradiation on High Density Polyethylene/ethylene‐vinyl Acetate/clay Nanocomposites

UV Ageing of Epoxy Resin-Based Glass Fiber-Reinforced Polymer Composites Incorporating with Various Curing Agents

Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose γ-rays

Enhancement of Durability of Glass Fiber-Reinforced Cement with PVA

Thermal Treatment Effects on Structure and Mechanical Properties of Polybutylene Terephthalate and Epoxy Resin Composites Reinforced with Glass Fiber

Effect of Γ-Ray Irradiation Grafting on the Surface Property and the Bulk Structure of M40J Fiber

Aging mechanisms of filled cross-linked polyethylene (XLPE) cable insulation material exposed to simultaneous thermal and gamma radiation

Effect of Gamma Irradiation on Strength Properties of Basalt Composites

Gamma‐ray irradiation effect on microstructure and physical performances of porous silica

Improving Durability of Glass Fiber Reinforced Polymer Composites by Incorporation of ZnO/OMMT Nanoparticles Subjected to UV Radiation and Hygrothermal Aging

Study of Heat Treatment Effect on Mechanical Properties of Epoxy Resin Reinforced with Fiber Glass

Color Changes and Mechanical Properties of Glass Fiber Reinforced Polycarbonate Composites after Thermal Aging