Abstract:Unmanned aerial vehicle (UAV) navigation has recently been the focus of many studies. The most challenging aspect of UAV navigation is maintaining accurate and reliable pose estimation. In outdoor environments, global navigation satellite systems (GNSS) are typically used for UAV localization. However, relying solely on GNSS might pose safety risks in the event of receiver malfunction or antenna installation error. In this research, an unmanned aerial system (UAS) employing the Applanix APX15 GNSS/IMU board, a Velodyne Puck LiDAR sensor, and a Sony a7R II high-resolution camera was used to collect data for the purpose of developing a multi-sensor integration system. Unfortunately, due to a malfunctioning GNSS antenna, there were numerous prolonged GNSS signal outages. As a result, the GNSS/INS processing failed after obtaining an error that exceeded 25 km. To resolve this issue and to recover the precise trajectory of the UAV, a GNSS/INS/LiDAR integrated navigation system was developed. The LiDAR data were first processed using the optimized LOAM SLAM algorithm, which yielded the position and orientation estimates. Pix4D Mapper software was then used to process the camera images in the presence of ground control points (GCPs), which resulted in the precise camera positions and orientations that served as ground truth. All sensor data were timestamped by GPS, and all datasets were sampled at 10 Hz to match those of the LiDAR scans. Two case studies were considered, namely complete GNSS outage and assistance from GNSS PPP solution. In comparison to the complete GNSS outage, the results for the second case study were significantly improved. The improvement is described in terms of RMSE reductions of approximately 51% and 78% for the horizontal and vertical directions, respectively. Additionally, the RMSE of the roll and yaw angles was reduced by 13% and 30%, respectively. However, the RMSE of the pitch angle was increased by about 13%.

GPS/INS Integrated Navigation for Quadrotor UAV Considering Lever Arm

Navigation for fixed-wing unmanned aerial vehicles in the presence of GNSS outages

Bridging GPS Outages for Fixed-wing Unmanned Aerial Vehicles

Indoor Integrated Navigation of Micro Aerial Vehicle Based on Radar-Scanner and Inertial Navigation System

A Parameter Self-Calibration Method for GNSS/INS Deeply Coupled Navigation Systems in Highly Dynamic Environments

A Miniature Integrated Navigation System for Rotary-Wing Unmanned Aerial Vehicles

An Improved Fast Self-Calibration Method for Hybrid Inertial Navigation System under Stationary Condition

Kalman Filtering Algorithm for Integrated Navigation System in Unmanned Aerial Vehicle

High accuracy Navigation System using GPS and INS system integration strategy

A GNSS/INS/LiDAR Integration Scheme for UAV-Based Navigation in GNSS-Challenging Environments

Improvement in the UAV position estimation with low-cost GPS, INS and vision-based system: Application to a quadrotor UAV

Integrated navigation accuracy improvement algorithm based on multi-sensor fusion

Small UAV localization method based on optical-flow and inertial navigation

A New Technique for INS/GNSS Attitude and Parameter Estimation Using Online Optimization

GNSS/INS integrated navigation algorithm framework based on cascade vector tracking algorithm for USV

Study on Adaptive GPS/INS Integrated Navigation System

Satellite/Inertial Navigation Integrated Navigation Method Based on Improved Kalman Filtering Algorithm

Relative Positioning Method for UAVs Based on Multi-Source Information Fusion

Estimate the Pitch and Heading Mounting Angles of the IMU for Land Vehicular GNSS/INS Integrated System

Seamless integration of polarization compass and inertial navigation data with a self-learning multi-rate residual correction algorithm

Model Aided Airborne Integrated Navigation System Based on an Improved Square-Root Unscented H∞ Filter