Abstract:This paper proposes and evaluates the implementation of a self-localization system intended for use in Unmanned Aerial Vehicles (UAVs). Accurate localization is necessary for UAVs for efficient stabilization, navigation and collision avoidance. Conventionally, this requirement is fulfilled using external hardware infrastructure, such as Global Navigation Satellite System (GNSS) or camera-based motion capture system (VICON-like [37]). These approaches are, however, not applicable in environments where deployment of cumbersome motion capture equipment is not feasible, as well as in GNSS-denied environments. Systems based on Simultaneous Localization and Mapping (SLAM) require heavy and expensive onboard equipment and high amounts of data transmissions for sharing maps between UAVs. Availability of a system without these drawbacks is crucial for deployment of tight formations of multiple fully autonomous micro UAVs for both outdoor and indoor missions. The project was inspired by the often used sensor PX4FLOW Smart Camera [12]. The aim was to develop a similar sensor, but without the multiple drawbacks observed in its use, as well as to make the operation of it more transparent and to make it independent of a specific hardware. Our proposed solution requires only a lightweight camera and a single-point range sensor. It is based on optical flow estimation from consecutive images obtained from downward-facing camera, coupled with a specialized RANSAC-inspired post-processing method that takes into account flight dynamics. This filtering makes it more robust against imperfect lighting, homogenous ground patches, random close objects and spurious errors. These features make this approach suitable even for coordinated flights through demanding forest-like environment. The system is designed mainly for horizontal velocity estimation, but specialized modifications were also made for vertical speed and yaw rotation rate estimation. These methods were tested in a simulator and subsequently in real world conditions. The tests showed, that the sensor is suitably reliable and accurate to be usable in practice.

Small UAV localization method based on optical-flow and inertial navigation

Self-localization of Unmanned Aerial Vehicles Based on Optical Flow in Onboard Camera Images

A Homography-Based Visual Inertial Fusion Method for Robust Sensing of a Micro Aerial Vehicle

A 2D Georeferenced Map Aided Visual-Inertial System for Precise UAV Localization

A Miniature Integrated Navigation System for Rotary-Wing Unmanned Aerial Vehicles

Indoor Integrated Navigation of Micro Aerial Vehicle Based on Radar-Scanner and Inertial Navigation System

Navigation for fixed-wing unmanned aerial vehicles in the presence of GNSS outages

Sensing and Control of a Quadrotor Using a Visual Inertial Fusion Method

Bridging GPS Outages for Fixed-wing Unmanned Aerial Vehicles

Solving the UAV localization problem using a Smooth Variable Structure Filtering

Improvement in the UAV position estimation with low-cost GPS, INS and vision-based system: Application to a quadrotor UAV

A Position Estimation and Control System for the Quadrotor in GPS-Deny Situation Based on FAST Detection and Optical Flow

Position estimation and control for quadrotor using optical flow and GPS sensors

A new SINS/GPS sensor fusion scheme for UAV localization problem using nonlinear SVSF with covariance derivation and an adaptive boundary layer

Tightly Coupled Integration of INS and UWB Using Fixed-Lag Extended UFIR Smoothing for Quadrotor Localization

GPS/INS Integrated Navigation for Quadrotor UAV Considering Lever Arm

VIUNet: Deep Visual–Inertial–UWB Fusion for Indoor UAV Localization

Indoor Visual-Based Localization System for Multi-Rotor UAVs

Research on Integrated Navigation System of Small UAV Based on MEMS Sensor

Range–Visual–Inertial Odometry with Coarse-to-Fine Image Registration Fusion for UAV Localization

Autonomous Flight Using UWB-Based Positioning System with Optical Flow Sensors in a GPS-Denied Environment