Abstract:This thesis explores the thermal and mechanical phenomena occurring during the Cold Metal Transfer (CMT) additive manufacturing process of TC4 titanium alloy. The investigation delves into the effects of layer-by-layer deposition on the thermal cycles, stress distribution, and microstructural evolution of the additive manufactured specimens. Key findings include the identification of thermal accumulation with increasing deposition layers, leading to a decrease in cooling rates and a slight increase in the peak molten pool temperatures. The temperature profiles on the substrate exhibit cyclic patterns of peaks and troughs, which become smoother and exhibit less variance between maximum and minimum temperatures as deposition progresses. Stress analysis reveals that equivalent stress within the deposited layers decreases with the number of layers. This is attributed to the thermal stress accumulation and stress cycles induced by multiple thermal cycles, which initially increase the equivalent stress. However, a reduction in cooling rates over time and the effects of remelting facilitate the release of interlayer stress, resulting in minimal residual stress within the cooled specimens. Microstructurally, the TC4 titanium alloy specimens are characterized by the presence of primary β phase spanning across multiple deposition layers, growing in the direction of additive manufacturing. The accumulated heat input from increased layering enhances the growth of the primary β phase.The specimens' microstructure features a basketweave pattern comprised of α' martensite, α, and β phases, with α' martensite directly transformed from the primary β phase. Repeated heating cycles foster diverse pathways for the secondary α phase's formation, leading to more pronounced, directionally parallel α phases and extensive basketweave structures within the specimen layers. Higher temperature gradients at specimen edges encourage the formation of needle-like α' martensite. This thesis contributes to the understanding of the thermal behavior, stress dynamics, and microstructural characteristics in TC4 titanium alloy during CMT additive manufacturing, highlighting the interplay between process parameters, thermal management, and material response.

Simulation-assisted Investigation on the Formation of Layer Bands and the Microstructural Evolution in Directed Energy Deposition of Ti6Al4V Blocks

Laser Powder Bed Fusion of Titanium Aluminides: An Investigation on Site-Specific Microstructure Evolution Mechanism

Three-dimensional Microstructure Evolution of Ti–6Al–4V During Multi-Layer Printing: a Phase-Field Simulation

In-situ grain structure control in directed energy deposition of Ti6Al4V

Numerical Simulation-Based Study on the Microstructure of TC4 Titanium Alloy in CMT Additive Manufacturing

Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing

A highly efficient computational approach for part-scale microstructure predictions in Ti-6Al-4V additive manufacturing

Erratum To: Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser Melting

Microstructural Modeling of the Α + Β Phase in Ti-6Al-4V: A Diffusion-Based Approach

A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing

Clarifying the formation of equiaxed grains and microstructural refinement in the additive manufacturing of Ti-Cu

An Integrated Modeling of Process-Structure-property Relationship in Laser Additive Manufacturing of Duplex Titanium Alloy

Mitigation of Residual Stresses and Microstructure Homogenization in Directed Energy Deposition Processes.

Investigation on Evolution Mechanisms of Site-Specific Grain Structures During Metal Additive Manufacturing

Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: Modelling and experimental calibration

Finite Element Analysis and Experimental Validation of Thermomechanical Behavior in Laser Solid Forming of Ti-6 Al-4 V

Towards a process-structure model for Ti-6Al-4V during additive manufacturing

Microstructure Characteristics and Failure Mechanisms of Ti-48Al-2Nb-2Cr Titanium Aluminide Intermetallic Alloy Fabricated by Directed Energy Deposition Technique

Hot Deformation Behavior of a Layered Heterogeneous Microstructure TiAl Alloy Prepared by Selective Electron Beam Melting

Investigation on solid-state phase transformation in a Ti-47Al-2Cr-2V alloy due to thermal cycling during laser additive manufacturing process

The simulation of microstructural evolutions in friction stir additive manufacturing