Abstract:The temperature evolution, stress evolution, and dendrite growth during the laser metal deposition (LMD) process of Inconel 718 alloy were simulated using a multi-scale model that combines the finite element method and the Cellular Automata (CA) method. This model established the relationship between the thermal behavior of the molten pool and the solidification characteristics, and predicted the morphological size of the solidified structure. Research indicates that under conditions of higher cooling rate and lower shape control factor, equiaxed grains are prone to form, with a lower degree of elemental segregation in this region, which is conducive to the precipitation of granular Laves phase. Conversely, under conditions of lower cooling rate and higher shape control factor, columnar grains are more likely to form, with a higher degree of elemental segregation in this region, leading to the precipitation of chain-like Laves phase. The results of thermo-mechanical coupled simulation suggest that the maximum transient thermal stress is located at the overlap position, and when the component cools down to room temperature, the maximum normal stress along the scanning direction is observed. Dendritic growth results demonstrate that during the equiaxed grain growth process in the top region of the melt pool, the released solute is constrained by time and space, leading to the accumulation of solute and the formation of interdendritic segregation. In areas with a higher grain density, the solute accumulation zones overlap, resulting in an increase in solute concentration, which inhibits dendrite growth. In the middle region of the melt pool, during the columnar grain growth process, the solute concentration in the gaps between adjacent grains continuously increases, resulting in micro-segregation phenomena. Experimental measurements have shown that the temperature field's melt pool morphology, stress values along the scanning path, and dendritic morphology are in good agreement with the experimental outcomes.

Influence of Laser Parameters on Segregation of Nb During Selective Laser Melting of Inconel 718

Segregation of Niobium in Laser Cladding Inconel 718 Superalloy

Effect Of Heat Input Parameters On Temperature Field In Inconel 718 Alloy During Selective Laser Melting

On the role of energy input in the surface morphology and microstructure during selective laser melting of Inconel 718 alloy

Effect of Layer-Wise Varying Parameters on the Microstructure and Soundness of Selective Laser Melted INCONEL 718 Alloy

High-fidelity Numerical Model of Melt Pool Dynamics in Selective Multi-Laser Melting of Inconel 718 under Different Scanning Strategies

Effects of laser scanning speed and building direction on the microstructure and mechanical properties of selective laser melted Inconel 718 superalloy

Understanding processing parameters affecting residual stress in selective laser melting of Inconel 718 through numerical modeling

Effect of Overlapping Ratio on Forming Quality during Numerical Simulation Selective Laser Melting of Inconel 718 Alloy

Microsegregation behavior of Inconel 718 superalloy prepared by electron beam smelting layered solidification technology

Study of Microsegregation and Laves Phase in Inconel718 Superalloy Regarding Cooling Rate During Solidification

Toward multiscale simulations for solidification microstructure and microsegregation for selective laser melting of nickel-based superalloys

Macro-Micro Coupled Simulation of SLM Process with Inconel 718 Superalloy

Effect of Laser Energy Density on the Microstructure and Microhardness of Inconel 718 Alloy Fabricated by Selective Laser Melting

Thermodynamic Behavior and Microstructure Evolution of Inconel 718 Alloy by Laser Metal Deposition

Impact of Laser Scanning Speed on Microstructure and Mechanical Properties of Inconel 718 Alloys by Selective Laser Melting

The Crystal Growth, Intercellular Spacing and Microsegregation of Selective Laser Melted Inconel 718 Superalloy

Impact of Laser Power and Scanning Velocity on Microstructure and Mechanical Properties of Inconel 738LC Alloys Fabricated by Laser Powder Bed Fusion

Multi-physics simulation of non-equilibrium solidification in Ti-Nb alloy during selective laser melting

Numerical simulation and solidification characteristics for laser cladding of Inconel 718

Study on the Numerical Simulation of the SLM Molten Pool Dynamic Behavior of a Nickel-Based Superalloy on the Workpiece Scale