Abstract:PurposeIn order to achieve a high-precision measurement of the incident and the reflected power, a WR1800 rectangular waveguide directional coupler with high directivity and high power level has been in-house developed. Multiple couplers will be installed in the 500-MHz high-power radio-frequency transmission lines delivering 200-kW continuous-wave power for the High Energy Photon Source (HEPS).MethodsThe directional coupler adopts the design scheme of primary and secondary transmission lines and coaxial coupling-head structure. The shape and dimensional parameters of the coupling head were carefully optimized by using microwave simulation codes. An optimum directivity of 64 dB was achieved in simulations.Results and conclusionsA prototype coupler was subsequently manufactured, and its directivity was measured to be 48.2 dB following a rigorous calibration procedure, largely exceeding the design goal and the commercial product. The coupler was then connected to an existing 500-MHz klystron system, and a high-power test with short-circuit termination was conducted. The high directivity of the coupler was confirmed up to 200 kW. During the 6 hours of power aging with continuous-wave 200 kW in a standing-wave setup, no performance degradation was observed on the coupler. The coupler temperature was measured to be 20 ∘documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$^{circ }$$end{document}C above the ambient environment. The design requirements were comfortably fulfilled. These constitute the first in-house development of a large-size waveguide directional coupler with high directivity and high power level for HEPS. The design, fabrication, and performance tests of the directional coupler are presented.

The Performance of RF Power Couplers with Capacitive Coupling for SRF Accelerators

The study and design of RF coupler for Chinese ADS HWR Superconducting Cavity

Coupler Conditioning and High Power Testing of ADS Spoke Cavity

RF Interconnections for Paper Electronics

High Power Conditioning of RF Couplers for the BISOL Linac

Double Cavity Coupling Structure Design of a Capacitive Wireless Power Transfer System under Seawater

Design and technology of high-power couplers, with a special view on superconducting RF

Power Test of the Separated Function RFQ Accelerator

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity

High RF power tests of the first 1.3 GHz fundamental power coupler prototypes for the SHINE project

A Coaxial Hom Coupler for A Superconducting Rf Cavity and Its Low-Power Measurement Results

Study of Separated Function Radio Frequency Quadrupoles Accelerator

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

RF thermal and new cold part design studies on TTF-III input coupler for Project-X

Design and Cold Model Experiment of a Continuous-Wave Deuteron Radio-Frequency Quadrupole

Development of a 500-MHz waveguide directional coupler with high directivity for HEPS

Simulation Study on 104 MHz Radio Frequency Quadrupole Accelerator

High-Power Testing of the APT Power Coupler

Radio-Frequency Power Test of A Four-Rod Rfq Accelerator for Pkunifty

The Radio-Frequency Design of an Iris-Type Coupler for the CPHS Radio-Frequency Quadrupole

Multi-physics Analysis and Experiment of a CW Four-Rod RFQ