Abstract:Active materials used in lithium ion batteries consist of micro-metric ceramic particles. Mechanical failure can happen within these brittle particles due to large internal stresses provoked by lithium intercalating in the crystalline structure during charge and discharge. Their mechanical behavior is directly related to some key intrinsic parameters, namely the elastic modulus, the fracture toughness and lithium di usivity. This works deals with the development of new characterization techniques to quantify these parameters at the local scale. Obtaining quantitative measurements is notably challenging for this type of specimen due to the highly heterogeneous structure of battery electrodes. For this, spinel LiMn2O4-based commercial cathodes are proposed as material of investigation. First, composition analysis of cathode materials at di erent states of charge was done. In general it was noticed that commercial cells are not as consistent as laboratory cells: impurities are often present (Ni, Co,...) and particles can be porous agglomerates of nanoparticles as well as large single grains. However only spinel structure was detected by X-ray di raction and Rietveld analysis showed a typical lattice expansion for higher lithium concentrations. A method using nanoindentation was developed. It consists of applying a large number of indents in cathode cross-sections and subsequently ltering the measurements depending on whether they t the set of hypotheses of the Oliver and Pharr method. It was observed that for decreasing lithium concentrations, the elastic modulus and the hardness increase from 87 GPa (0% State of Charge) to 104 GPa (100% SoC) and from 7.0 GPa (0% SoC) to 8.0 Gpa (100%SoC), respectively. With the help of contact-resonance atomic force microscopy, the elastic property could also be qualitatively mapped and it seems that the particles are homogeneous. Added to micro-raman spectroscopy, it was observed that neighboring particles can have di erent lithiation levels. The fracture toughness was estimated by measuring the crack opening displacement by atomic force microscopy and applying Irwin’s near eld theory. A toughness of about 0.9 MPa·m was found but should not be taken at face-value. Irwin’s theory requires a purely elastic-brittle fracture with traction-free crack walls. Unfortunately this condition cannot be met due to the size of the particles and the toughness is surely overestimated. Associated with electron backscattered di raction, cleavage planes were also evaluated on a reference {111} wafer. It was found that cracks always propagate in the <121> direction, corresponding to {101} planes just below the surface. At higher depths (> 100 nm), the crack deviates of 30 to 40◦. The last part of this work consists of developing a model to better comprehend electrochemical strain microscopy “time spectroscopy” (ESM-TS). It is the most promising technique to quantify locally ionic di usion coe cients. An AFM cantilever is used

Estimation of NCM111/graphite Acoustic Properties under Different Lithium Stoichiometry Based on Nondestructive Acoustic in Situ Testing

(Invited) Understanding the Coupled Electrochemical-Mechanical Behavior of Materials for Improving the Performance and Durability of Lithium-Ion Batteries

Visualizing the Chemistry and Structure Dynamics in Lithium-Ion Batteries by In-Situ Neutron Diffraction

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

In-situ Observation of Inhomogeneous Degradation in Large Format Li-ion Cells by Neutron Diffraction

Acoustic Response Characteristics of Lithium Cobaltate/Graphite Battery during Cycling

Theoretical Analysis of Ultrasonic Reflection/Trasmission Characteristics of Lithium-Ion Battery

Cyclic aging monitoring of lithium-ion battery based on acoustic emission

Ultrasonic Nondestructive Diagnosis of Cylindrical Batteries Under Various Charging Rates

Insight into the electrochemical behaviors of NCM811 | SiO‐Gr pouch battery through thickness variation

Mechanical characterization of lithium-ion batteries with different chemistries and formats

A robust ultrasonic characterization methodology for lithium-ion batteries on frequency-domain damping analysis

Estimating State of Charge of Lithium-ion Batteries by Using Ultrasonic Guided Waves Detection Technology

Ultrasonic diagnosis of the nonlinear aging characteristics of lithium-ion battery under high-rate discharge conditions

Unveiling the migration behavior of lithium ions in NCM/Graphite full cell via in operando neutron diffraction

Kinetic and transport characteristics of LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries

Ultrasonic guided wave measurement and modeling analysis of the state of charge for lithium-ion battery

Noninvasive ultrasound for Lithium-ion batteries state estimation

Rapid State of Health Estimation of Lithium-ion Batteries Based on an Active Acoustic Emission Sensing Method.

Guided waves propagation in lithium-ion batteries: Theoretical modeling and experimental analysis

Nanomechanics of Li-ion battery materials