Abstract:A series of sodium alginate (SA) nanocomposite films with different loading levels of graphitic-like carbon nitride (g-C3N4) were fabricated via the casting technique. The structure and morphology of nanocomposite films were investigated by X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Thermogravimetric analysis results suggested that thermal stability of all the nanocomposite films was enhanced significantly, including initial thermal degradation temperature increased by 29.1 °C and half thermal degradation temperature improved by 118.2 °C. Mechanical properties characterized by tensile testing and dynamic mechanical analysis measurements were also reinforced remarkably. With addition of 6.0 wt % g-C3N4, the tensile strength of SA nanocomposite films was dramatically enhanced by 103%, while the Young's modulus remarkably increased from 60 to 3540 MPa. Moreover, the storage modulus significantly improved by 34.5% was observed at loadings as low as 2.0 wt %. These enhancements were further investigated by means of differential scanning calorimetry and real time Fourier transform infrared spectra. A new perspective of balance was proposed to explain the improvement of those properties for the first time. At lower than 1.0 wt % loading, most of the g-C3N4 nanosheets were discrete in the SA matrix, resulting in improved thermal stability and mechanical properties; above 1.0 wt % and below 6.0 wt % content, the aggregation was present in SA host coupled with insufficient hydrogen bondings limiting the barrier for heat and leading to the earlier degradation and poor dispersion; at 6.0 wt % addition, the favorable balance was established with enhanced thermal and mechanical performances. However, the balance point of 2.0 wt % from dynamic mechanical analysis was due to combination of temperature and agglomeration. The work may contribute to a potential research approach for other nanocomposites.

Highly improved mechanical and thermal properties of alkali silicate and graphene nanoplatelet composite adhesives

Mechanical and thermal properties of graphene and carbon nanotube reinforced epoxy/boron nitride adhesives

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Thermal conductivity and shear strength characterisation of hybrid GNPs and silane functionalised BN as thermal conductive adhesive

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Effect of water immersion on shear strength of epoxy adhesive filled with graphene nanoplatelets

High Mechanical and Thermal Properties of Epoxy Composites with Liquid Crystalline Polyurethane Modified Graphene

Mechanical, Thermal and Morphological Characterization of Graphene/Al2O3‐Reinforced Epoxy Hybrid Nanocomposites

Influence of graphene nanoplatelets on mechanical properties and adhesive wear performance of epoxy-based composites

Thermal conductivity and mechanical performance of hexagonal boron nitride nanosheets-based epoxy adhesives

Enhanced thermal and electrical conductivity in epoxy nanocomposites via liquid crystal-driven alignment of graphene

Influence of g-C3N4 nanosheets on thermal stability and mechanical properties of biopolymer electrolyte nanocomposite films: a novel investigation

Enhanced thermal conductivity of functionalized-graphene/boron nitride flexible laminated composite adhesive via a facile latex approach

Synergy Effects of Multi-Walled Carbon Nanotube and Graphene Nanoplate Filled Epoxy Adhesive on the Shear Properties of Unidirectional Composite Bonded Joints

Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives

Development of Polymer Composites Using Modified, High-Structural Integrity Graphene Platelets

Preparation and Thermal Properties of the Graphene-Polyolefin Adhesive Composites: Application in Thermal Interface Materials

Effect of graphene nanoplatelets addition on the elastic properties of short ceramic fiber-reinforced aluminum-based hybrid nanocomposites

Mode-I and II fracture behavior of metal-to-composite bonded interfaces with a graphene nanoplatelet-reinforced structural epoxy adhesive

Mechanical and Thermal Properties of Graphene Nanoplates (gnps)/lithium Aluminosilicate (LAS) Composites: an Analysis Based on Mathematical Model and Experiments

Reinforcement of graphene nanoplatelets on water uptake and thermomechanical behaviour of epoxy adhesive subjected to water ageing conditions