Abstract:Organic-inorganic hybrid perovskites have been a focus in the photovoltaic research field due to their remarkable advantages such as tunable direct bandgap, low exciton binding energy, high light harvesting, and so on. The power conversion efficiency (PCE) of lead (Pb)-based perovskite solar cells (PSCs) has been rapidly raised from 3.8% to 25.5% over the decades. With the advantages of a simple preparation process and low production cost, PSCs have great potential in commercialization However, the toxicity of lead in traditional PSCs limits their large-scale production Among all lead-free perovskites, the tin-based one inherits the majority of the excellent photoelectric properties of lead-based perovskites. However, the maximum PCE of tin-based PSCs has only exceeded 13%. Although the electronic structure of Sn2+ is similar to that of Pb2+, it is easy to be oxidized to Sn4', and the formation energy of Sn vacancy defects is low, resulting in heavy p-doping in tin-based perovskite films. The background carrier concentrations of tin-based perovskites are as high as 1018-1020 cm(-3), which makes photo-generated carriers easy to be recombined. Tin-based perovskites usually experience single-molecule recombination, accompanied by a small amount of bi-molecular recombination, and Auger recombination is negligible. Therefore, reducing recombination in tin-based perovskites is to suppress the single-molecule recombination. At present, additive engineering and component modification strategies are mainly adopted to inhibit carrier recombination in tin-based PSCs. Additive engineering includes tin compensating additives. reducing additives and some other additives which interact with perovskites. Theories and experiments show that adding tin compensating additives in precursor solution can effectively improve the chemical potential of Sn and increase the formation energy of tin vacancies. Although the work mechanism of stannous halide as an additive is not fully understood, it has become an indispensable part to prepare high performance tin-based PSCs. The introduction of reducing additives in the precursor can effectively reduce Sn4+ and inhibit the oxidation of Sn2+, thereby inhibiting the generation of tin vacancies, optimizing the morphology of the film, and improving the efficiency and stability of the device. In addition, some additives which interact with perovskite through coordination bonds, ionic bonds and hydrogen bonds can optimize the nucleation rate of tin-based perovskites and passivate the unsaturated coordination of Sir+ at the grain boundaries. The composition modification of tin-based perovskites mainly includes A-site and X-site substitutions. Since the band structure of tin-based perovskites is mainly determined by Sn and X ions, A-site cation substitution only fine-tunes the bandgap of the perovskite. However. A-site cation substitution can tune the tolerance factor of perovskite, thereby improving the efficiency and stability of perovskite. As the alkyl chain of the A-site cation gradually increases, low-dimensional perovskites will be formed. The low-dimensional perovskite can inhibit the self-doping and ion migration, improve the efficiency and stability of the PSCs. It is worth noting that the current efficient tin-based PSCs are mainly focused on low-dimensional perovskites. In addition, since the np(2) electrons of halogens directly participate in the construction of the electronic structure. the bandgap of tin-based perovskites can be directly changed by adjusting the X-site anions. Compared with lead-based perovskites, tin-based ones have more suitable bandgap and higher theoretical efficiency. At the same time, the low toxicity of tin-based perovskites is also conducive to their large-scale industrial production. It is believed that with the in-depth research, tin-based perovskite will surely exert its full potential in the photovoltaic field.

The Effect of Defects in Tin-Based Perovskites and Their Photovoltaic Devices

Tin-Based Defects and Passivation Strategies in Tin-Related Perovskite Solar Cells

Recent Progress in Inorganic Tin Perovskite Solar Cells

Origins and Suppression of Sn(II)/Sn(IV) Oxidation in Tin Halide Perovskite Solar Cells

Mechanistic Understanding of Oxidation of Tin‐based Perovskite Solar Cells and Mitigation Strategies

Dual-site Passivation of Tin-Related Defects Enabling Efficient Lead-Free Tin Perovskite Solar Cells

Recent Advances in Tin-Based Perovskite Solar Cells

Defect Compensation and Lattice Stabilization Enables High Voltage Output in Tin Halide Perovskite Solar Cells

Advances in Tin(II)‐Based Perovskite Solar Cells: From Material Physics to Device Performance

The Defect Passivation of Tin Halide Perovskites Using a Cesium Iodide Modification

Efficient Tin Perovskite Solar Cells via Suppressing Autoxidation in Inert Atmosphere

Open-Circuit Voltage Deficits in Tin-Based Perovskite Solar Cells

Degradation mechanism of hybrid tin-based perovskite solar cells and the critical role of tin (IV) iodide

Advances on Tin-Based Perovskite Solar Cells

Effects of organic cations on the defect physics of tin halide perovskites

Origins of the Accelerated Decomposition in Inorganic Tin Perovskites Contaminated by Oxygen: Ab Initio and Quantum Dynamics Study

Dopants for Enhanced Performance of Tin-Based Perovskite Solar Cells—A Short Review

Suppression of Nonradiative Recombination by Vacuum‐Assisted Process for Efficient Lead‐Free Tin Perovskite Solar Cells

Counter‐Doping Effect by Trivalent Cations in tin‐based Perovskite Solar Cells

Optoelectronic Properties of Tin–Lead Halide Perovskites

Photovoltaic potential of tin perovskites revealed through layer-by-layer investigation of optoelectronic and charge transport properties