Abstract:The thermophysical properties of Si–Ge–Ag alloys in a broad temperature range are essential for the design of electronic devices. In this work, relationships between specific heat, thermal expansion, thermal conductivity and temperature, as well as chemical composition of Si–Ge–Ag alloys were clarified. Moreover, various thermophysical properties’ prediction strategies of multicomponent alloys from pure elements were evaluated. The specific heat of Ag–Si, Ag–Ge, Si–Ge, and Si–Ge–Ag alloys was determined by the differential scanning method. The results showed a significant increase with rising temperature at low temperatures followed by a gradual rise at high temperatures. The specific heat reached the maximum value when a small amount of Si/Ge was introduced to Ag. The coefficient of thermal expansion was obtained by a dilatometric method and increased slightly with the increasing temperature, while decreased linearly with the increase in the Si/Ge content. Furthermore, the thermal conductivity was investigated via a laser flash apparatus. It decreased with rising temperature when the Ag content is smaller than 50%, whereas it increased with rising temperature when the Ag content exceeds 50%. The thermal conductivity of Si–Ge alloys decreased with rising temperature and reached the local minimum for Si–Ge alloys with an equiatomic ratio of Si and Ge. More importantly, the experimental results reveal that the thermal expansion that is related to volume can be estimated approximately by pure metals in Si–Ge–Ag alloys. However, this rule cannot be applied to specific heat and thermal conductivity, which is due to the influence of lattice vibration, electronic scattering, and microstructure.

Specific Heat, Thermal Diffusivity, and Thermal Conductivity of Ag–Si Alloys Within a Wide Temperature Range of 293–823 K

Specific Heat of Ternary Ag–Si–Ge Alloys from 123 K to High Temperatures: Experiment and Prediction

Thermal Expansion and Thermal Diffusivity Properties of Co-Si Solid Solutions and Intermetallic Compounds

Temperature and composition dependence of thermophysical properties within a wide temperature range for ternary Si–Ge–Ag alloys

A DSC Study of Undercooling Thermodynamics and Crystallization Kinetics for Liquid Ag-Si Alloys

A Calorimetric Study Assisted with First Principle Calculations of Specific Heat for Si-Ge Alloys Within a Broad Temperature Range

Thermophysical Properties and Atomic Structure of Liquid Si-Ge Alloys

Experimental Determination and Molecular Dynamics Simulation of Specific Heat for High Temperature Undercooled Liquid

Selective Laser Melting of Pure Ag and 925ag Alloy and Their Thermal Conductivity

Microstructure and Thermal Conductivity of the As-Cast and Annealed Al–Cu–Mg–Si Alloys in the Temperature Range from $$25\,^{\circ }\hbox {C}$$ 25 ∘ C to $$400\,^{\circ }\hbox {C}$$ 400 ∘ C

A Quantitative Study on the Interaction Between Silicon Content and Heat Treatment on Thermal Conductivity of Al-Si Binary Alloys

Microstructure and Thermal Conductivity of the As-Cast and Annealed Al–Cu–Mg–Si Alloys in the Temperature Range from 25 ^∘C to 400 ^∘C

Experimental investigation of phase equilibria in the Al-Ag-Si system

Thermodynamic Properties and Microstructural Characteristics of Binary Ag-Sn Alloys

Thermophysical Property of Undercooled Liquid Binary Alloy Composed of Metallic and Semiconductor Elements

Determination of the Enthalpy of Fusion and Thermal Diffusivity for Ternary Cu 60 − X Sn X Sb 40 Alloys

Effects of silicon content on electrical resistivity and thermal conductivity of Al-Si binary alloys.

Rapid solidification of Ag-Si eutectic alloys in drop tube

Microstructure And Thermal Conductivity Of The As-Cast And Annealed Al-Cu-Mg-Si Alloys In The Temperature Range From To

Thermal Conductivity of the Mg–Al–Zn Alloys: Experimental Measurement and CALPHAD Modeling

Thermodynamic Properties and Phase Transitions of Ternary Co–Cu–Si Alloys with Equiatomic Co/Cu Ratio