Abstract:To solve the problems of low-strength and unsatisfactory connection quality in the plastic clinching of heterogeneous lightweight materials for car bodies, Q235 steel sheets and 5052 aluminum alloy sheets were selected as research objects. An inclined wall die for plastic clinching was designed on the basis of the deformation and flow characteristics of sheets in the plastic clinching process. Elastic–plastic finite element numerical simulation and experimental research were conducted to analyze the plastic clinching process of the inclined wall die, and the failure mode and mechanism of the clinching joints in the shear and peel experiment were comprehensively studied. Results showed that the inclined wall die can effectively increase the interlock value of the joints and reduce the maximum joining force during the clinching process under the condition of ensuring the neck thickness of the joints. When the inclined wall angle α increased from 90° to 100°, the interlock value increased by 38.9%, and the maximum joining force decreased by 8.3%. The influence of the inclined wall structure on joint quality can be divided into the extrusion, radial inflow, and stability stages. The comparison between the clinching experiment and the finite element results showed that the results are in good agreement, proving that the finite element model of the plastic clinching of the inclined wall die exhibits a high degree of credibility and verifying the feasibility of the practical application of the inclined wall die. Finally, the major failure mode of the joints under shear and peel loads was separation failure.

Analysis of Iron Loss in Interlocked Lamination Core

Influence of Interlocking Dowels on Motor Core Loss

Clamping force prediction for automatic drilling of stacked thin-walled workpieces based on finite element method

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Iron Loss Separation in High Frequency Using Numerical Techniques

Loss parameter identification of a welded ring core lamination of NO‐electrical steel

A Simplified Iron Loss Model for Laminated Magnetic Cores

Analysis and Optimization of a Modular Stator Core with Segmental Teeth and Solid Back Iron for Pm Electric Machines

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Calculation of core loss under distorted flux density with minor hysteresis loops for laminated steel structure

Analysis of laminated crack defect in the upsetting process of heavy disk-shaped forgings

Empirical Implementation of the Steinmetz Equation to Compute Eddy Current Loss in Soft Magnetic Composite Components

The Effect of Sample’s Dimension and Cutting Technology on Magnetization and Specific Iron Losses of FeSi Laminations

Iron Loss Quantification in the Aim of the Estimation of Eddy Currents in Clamping Devices

Core Loss Analysis of Soft Magnetic Composites Based on 3D Model Considering Temperature Influence

Core loss analysis of soft magnetic composites considering the inter-particle eddy current loss

Iron Loss Calculation Model Considering Stress Influence in Amorphous Alloy Core

Experiment and Numerical Simulation on Delamination During the Laminated Steel Sheet Forming Processes

Effect Of Cutting And Slot Opening On Amorphous Alloy Core For High-Speed Switched Reluctance Motor