Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Experimental Study On Single-Refrigerant Cascade Refrigeration System

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

A Study On A New Auto-Cascade Refrigerating Cycle

Utilization of Ultra-Low Temperature Heat by a Novel Cascade Refrigeration System with Environmentally-Friendly Refrigerants

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Theoretical Analysis of a Double Ejector-Expansion Autocascade Refrigeration Cycle Using Hydrocarbon Mixture R290/R170

Experimental Study on an Absorption Refrigeration System at Low Temperatures

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Experimental Studies on an Variable Compositions Auto-Cascade Refrigerator Operating With a Rectifying Column

Experimental Study on Throttle Opening in Auto-cascade Refrigeration System

A novel low-temperature absorption–compression cascade refrigeration system

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Experimental Analysis of the R744/R404A Cascade Refrigeration System with Internal Heat Exchanger. Part 1: Coefficient of Performance Characteristics

Performance comparison of the single-refrigerant cascade refrigerating system