Abstract:Reducing the energy consumption of buildings is of great importance to achieve carbon neutrality targets. The air conditioning (AC) system in buildings, as a large energy consumer, should be taken into account as one of the main building service systems for energy saving integrated with energy-efficient and environmental-friendly technologies. Indirect evaporative cooler (IEC), constrained by its cooling principle, originally exerts energy saving potential in hot-arid regions. Recently, progress has been made in expanding its application to hot-humid regions. However, due to the large cooling load in hot-humid regions, an IEC-integrated hybrid system should be developed as an improved solution to effectively save energy and maintain the indoor thermal comfort. In view of the lack of a complete hybrid IEC system being reported thus far, in this study, the IEC is combined with a cooling coil unit as a primary air handling unit (IEC-PAU) for fresh air handling and supply. Accordingly, the model of the IEC-PAU with indoor fan coil units (FCUs) is constructed and incorporated into a typical office building, and the results are compared with a baseline case under hot-humid climate conditions. Comprehensive energy, economic, and environmental benefits are analyzed considering different setpoint temperatures in typical cities of the Great Bay area (GBA) of China. Results show that the proposed system could reduce the energy consumption of 4.6 kWh/m2 on average, with the acceptable thermal comfort level as they are in the reference cases. The greatest energy saving ratio is 8.3%, while the performance of the proposed system declines under the higher setpoint temperature. The saved electricity expenses can lead to the average discounted payback period of 8.2 years in the GBA cities. Furthermore, an annual greenhouse gas emission of 4.8 t on average can be diminished. In summary, this work demonstrates the feasibility of the hybrid IEC system as an effective approach for energy saving in hot-humid regions, which is promising to prompt the carbon neutrality in China.

A General Method to Evaluate the Applicability of Natural Energy for Building Cooling and Heating: Revised Degree Hours

A revised degree hours evaluation method for energy saving potential of free cooling systems

Performance Simulation and Applicability Analysis of Hybrid Air Conditioner in Cooling Season

Energy Saving Potential of Heat Removal Using Natural Cooling Water in the Top Zone of Buildings with Large Interior Spaces

Natural ventilation cooling effectiveness classification for building design addressing climate characteristics

Analysis on annual energy saving potential of natural ventilation for office buildings

Construction Method for Air Cooling/heating Process in HVAC System Based on Grade Match Between Energy and Load

Method of Defining Heating and Cooling Period for Residential Buildings in Hot Summer and Cold Winter Zone

Optimizing Air Conditioning Systems by Considering the Grades of Sensible and Latent Heat Loads

Energy Efficiency of an Air Conditioning System Coupled with a Pipe-Embedded Wall and Mechanical Ventilation

Numerical Analysis of the Methods for Reducing the Energy Use of Air-Conditioning Systems in Non-Uniform Indoor Environments

Techno-economic Evaluation and Environmental Benefit of Hybrid Evaporative Cooling System in Hot-Humid Regions

Utilizing shallow geothermal energy to develop an energy efficient HVAC system

A framework for rapid diagnosis of natural ventilation effect during early design stage using Thermal Autonomy

Influence of ventilation-behavior during off-periods on energy-consumption for an intermittently heated room of dormitory buildings

Natural ventilation potential of high-rise residential buildings in northern China using coupling thermal and airflow simulations

A critical review of combined natural ventilation techniques in sustainable buildings

Using natural ventilation in office buildings under subtropical climate: A case Study in Shenzhen

An Energy Saving Potential Evaluation Method of a Pipe-Embedded Wall Integrated with Natural Energies

Design method for multi-stage fresh air treatment system with high seasonal energy efficiency

Evaluating wind-driven natural ventilation potential for early building design