Abstract:Natural ventilation is one of the most important passive strategies for optimizing building energy saving and environmental performance. However, it is difficult for natural ventilation design to realize the utmost utilization of ambient energy based on the conventional design process due to the design performance of natural ventilation is significantly influenced by the schematic plan of a building. Therefore, this study introduces a design process using a concise model of Thermal Autonomy as an evaluation metric for the early design stage. To apply the proposed metric to modern office buildings, which are equipped with effective HVAC systems, a practical and common thermal comfort criterion of 21°C–27°C is adopted to replace the adaptive comfort standard in the original Thermal Autonomy quantification. The availability of the proposed metric for rapid diagnosis is evaluated through parametric simulation based on a typical office building in Shanghai. The evaluation result and the visual map of Thermal Autonomy are verified to determine the proper air change rate and to help architects to understand the design performance of their natural ventilation scheme. In the case study, the proper air change rate is estimated at 8 ac/h corresponding to a comfort hour of 1314 h. This comfort hour value accounts for the maximum value of 50% during the occupied hour. In addition, the effect of Thermal Autonomy in decision-making regarding envelope insulation and initial operation conditions is examined. It is beneficial to maintain the indoor thermal environment by setting the lower outdoor temperature limit for opening windows at 17°C under a higher feasible ventilation volume. A relatively high envelope insulation level with 50 mm or 75 mm insulation layer is advantageous for improving Thermal Autonomy under a larger ventilation volume condition. The method proposed in this study is practical for objectively evaluating the design performance of natural ventilation during the early design stage.

Using natural ventilation in office buildings under subtropical climate: A case Study in Shenzhen

Thermal Comfort in Semi-Outdoor Spaces Within an Office Building in Shenzhen: A Case Study in a Hot Climate Region of China

Energy Efficiency Optimization Strategies for University Research Buildings with Hot Summer and Cold Winter Climate of China Based on the Adaptive Thermal Comfort

A Field Study on Thermal Comfort and Air-Conditioning Energy Use in an Office Building in Guangzhou

Multi-factor optimization of energy performance in naturally ventilated building: a case study of office building in hot summer and cold winter climate

Study on Natural Ventilation Potential of Ordinary Office Buildings in Guangzhou Based on Architectural Factors

An experimental case study of natural ventilation effects on the residential thermal environment and predicted thermal comfort in Kunming

Analysis on annual energy saving potential of natural ventilation for office buildings

Natural ventilation potential for residential buildings in a densely built-up and highly polluted environment. A case study

Ventilation Characteristics and Performance Evaluation of Different Window-Opening Forms in a Typical Office Room

Effect of Window Openable Area and Shading on Indoor Thermal Comfort and Energy Efficiency in Residential Buildings with Various Operating Modes

Natural ventilation in high-rise office building – Comfort and energy performance

A framework for rapid diagnosis of natural ventilation effect during early design stage using Thermal Autonomy

Thermal Environment and Energy Performance of a Typical Classroom Building in a Hot-Humid Region: A Case Study in Guangzhou, China

Improved Operating Strategy for Air-Conditioning Systems Based on the Indoor Occupancy Rate

Adaptation-based Indoor Environment Control with Night Natural Ventilation in Autumn in an Office Building in a Hot-Humid Area

Energy Saving Potential of Natural Ventilation in China: The Impact of Ambient Air Pollution

Analysis of Natural Ventilation Performance Gap between Design Stage and Actual Operation of Office Buildings

Design optimization and field demonstration of natural ventilation for high-rise residential buildings

Air infiltration and related building energy consumption: A case study of office buildings in Changsha, China