Mode Transmission Analysis of Tapered Fiber Based on Coupled Local Mode Theory

Siyu Chen,Huiyi Guo,Zhi Wang,Yange Liu

2019-01-01

Abstract:A simulation method of analyzing mode transmission characteristics in tapered fiber based on coupled local mode theory is presented. The method gives a clear analysis of mode component in tapered fiber.

What problem does this paper attempt to address?

Coupled mode theory analysis of mode-splitting in coupled cavity system.

Qiang Li,Tao Wang,Yikai Su,Min Yan,Min Qiu

DOI: https://doi.org/10.1364/OE.18.008367

IF: 3.8

2010-01-01

Optics Express

Abstract:We analyze transmission characteristics of two coupled identical cavities, of either standing-wave (SW) or traveling-wave (TW) type, based on temporal coupled mode theory. Mode splitting is observed for both directly (cavity-cavity) and indirectly (cavity-waveguide-cavity) coupled cavity systems. The effects of direct and indirect couplings, if coexisting in one system, can offset each other such that no mode splitting occurs and the original single-cavity resonant frequency is retained. By tuning the configuration of the coupled cavity system, one can obtain different characteristics in transmission spectra, including splitting in transmission, zero transmission, Fano-type transmission, electromagnetically-induced-transparency (EIT)-like transmission, and electromagnetically-induced-absorption (EIA)-like transmission. It is also interesting to notice that a side-coupled SW cavity system performs similarly to an under-coupled TW cavity. The results are useful for the design of cavity-based devices for integration in nanophotonics. (C) 2010 Optical Society of America
Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Xiaofeng Jin

DOI: https://doi.org/10.1023/A:1022680608509

1998-01-01

International Journal of Infrared and Millimeter Waves

Abstract:We discuss theoretical analysis of optical fiber taper with its refractive index gradually changing alone its propagation axis caused by photosensitivity. The numeric results for two different taper shapes in step-index fiber show that the couplings of fundamental mode to the reflected mode and to high-order modes is relatively small provided the change is gradual. The fundamental mode has the capability of excellent transmission that can adjust itself adiabatically to the refractive index change. The experiment demonstrates its effectiveness for optical interconnection with different mode-fields
Study of mode propagation with 632.8-nm laser in tapered fiber

陈和 He Chen,陆均良 Junliang Lu,赵承良 Chengliang Zhao,程波涛 Botao Cheng,陆璇辉 Xuanhui Lu,He Chen,Junliang Lü,Chengliang Zhao,Botao Cheng,Xuanhui Lu

DOI: https://doi.org/10.3788/COL20090709.0771

IF: 2.56

2009-01-01

Chinese Optics Letters

Abstract:The material dispersion of a tappered fiber is described by Sellmeier's equation. The dependence of refractive index on wavelength kind doping concentration is discussed. A fie-Ne laser with the output wavelength of 632.8 nm is used in the experiment. When the cutoff frequency of the fiber is less than the laser frequency, the guiding modes of a single-mode fiber (at 1550 nm) are investigated. The results show that the original single-mode fiber becomes a multi-mode waveguide. The propagation and mode coupling of the light, in the taper region are analyzed. By controlling the taper end size of the fiber, the unique tapered fiber call convert a multi-mode beam into a single-mode one.
Modeling electromagnetic wave coupling and mode conversion effects in multitwisted bundle of twisted-wire pairs (MTB-TWP) above ground plane

Oussama Gassab,Liang Zhou,Wen-Yan Yin,Hao Xie

DOI: https://doi.org/10.1002/jnm.2539

2020-01-01

Abstract:A multiconductor transmission line (MTL) model is developed for predicting electromagnetic wave coupling effects with multitwisted bundle of twisted-wire pairs (MTB-TWP) running above a ground plane. Such MTB-TWP is described as a sequential repeated structure, where all its parameters are formulated in terms of sequences. In particular, the parametric equations of all the wires are derived and described by a set of generalized equations, where the unit tangent vector for each wire is also determined analytically. In addition, the averaged per-unit-length (p.u.l.) parameters are described by recurrence formulas. Further, the equivalent voltages for describing the field-to-wire coupling of MTB-TWP are obtained and determined analytically. The modal domain decomposition is performed with special loading terminals to split out the common mode (CM) and differential mode (DM) signals, where the CM-to-DM conversions are further investigated in order to indicate the balanced property in such MTB-TWP system. On the other hand, the effect of dielectric coatings of all the wires is also characterized, where the averaged modal p.u.l. capacitance matrix is obtained numerically. A comparison is performed with the other wiring structures to visualize the benefits of our MTB-TWP model. An extended MTL model is also validated in comparison with the commercial software FEKO.
Mode Coupling Strength in A Microsphere Cavity Coupled with Fiber Taper

Xiao-Wei Wu,Chang-Ling Zou,Yong Yang,Chun-Hua Dong,Yun-Feng Xiao,Zheng-Fu Han,Guang-Can Gun

DOI: https://doi.org/10.1109/icton.2008.4598771

2008-01-01

Abstract:With the coupled-mode theory, we analyzed the energy transmission between the microsphere cavity and waveguide system. and revealed the mode coupling strength in a bare microsphere coupled with a fiber taper theoretically and experimentally. In a practical taper-microsphere coupling system, the traveling wave clockwise (CW) and counterclockwise (CCW) whispering gallery modes (WGMs) Should existed simultaneity. Those two modes are coupled in the microsphere cavity with a Coupling strength (beta). In experiment, the reflection spectra of the taper-microsphere system were investigated. By modifying various Coupling condition for microspheres, different groups of data were obtained from the spectra, and used as fitting data for coupling strength estimation. The theory will be valuable in evaluating the upper limit of quality factor (Q) of a microcavity basing oil the WGMs. Referring to the result and consequence of beta, it enables multiple ways to improve the Q-factor of a real cavity like annealing. Because the experiment device is compact and sensitive, such method is also promising for detecting the propagating loss in fiber instead of traditional way.
Analysis of Power Transfer Characteristics Among Many Parallel Optical Fibers

Botao Cheng,Xuanhui Lu

IF: 0.6

2006-01-01

ACTA PHOTONICA SINICA

Abstract:Based on a coupled-mode theory, the power transfer among many parallel single-mode optical fibers formed into "--" has been investigated. The analysis shows that the distance between each of the N fiber centers has an effect on the coupling coefficient and power transfer. The solution of the coupled-equation for three parallel single-mode optical fibers has been given, and is comparatively studied for different initial conditions. Numerical simulations show that power transfer will be periodical when coupling occur among many parallel single-mode optical fibers formed into "--".
An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

CHENG Bo-tao,YUAN Bo-jiang,CHEN He,ZHAO Cheng-liang,LU Xuan-hui

DOI: https://doi.org/10.3969/j.issn.1005-5630.2006.03.007

2006-01-01

Abstract:The guiding modes of a single mode fiber(@1550nm),when the cutoff frequency of the fiber is less than the frequency of the launching field,have been investigated.The fused tapered fiber has been fabricated by using the flame of a spirit lamp.If controlling the fiber dimension well during pulling process,the unique tapered fiber will have a multimode input end and a single mode output end for launching wavelength 632.8nm,which are demonstrated in our experiment.
Taper-Microsphere Coupling with Numerical Calculation of Coupled-Mode Theory

Chang-Ling Zou,Yong Yang,Chun-Hua Dong,Yun-Feng Xiao,Xiao-Wei Wu,Zheng-Fu Han,Guang-Can Guo

DOI: https://doi.org/10.1364/josab.25.001895

2008-01-01

Abstract:We have numerically studied a taper-microsphere coupling system with coupled-mode theory by introducing a mode-coupling mechanism. Transmission and reflection coefficients have been obtained directly through numerical calculation for a spherical silica microcavity. In the presence of the modal coupling mechanism, the optimal condition for transferring the light energy into the microsphere is no longer the critical coupling point. Instead, it should be in the under-coupling regime and can be reached by optimizing the size of the fiber taper and the taper-microsphere gap. (C) 2008 Optical Society of America
Power Transfer Characteristics among N Parallel Single-Mode Optical Fibers

Ye Wang,Dajian Xue,Xuanhui Lu

DOI: https://doi.org/10.1016/j.ijleo.2008.02.011

IF: 3.1

2008-01-01

Optik

Abstract:Based on the coupled-mode theory, the power transfer among “---” arranged parallel single-mode optical fibers has been investigated. The analysis shows that the distances between each two of the N fibers centers have effects on the coupling coefficient and power transfer. The solution of the coupled equations for three parallel single-mode optical fibers is given, and is studied for different initial conditions comparatively. Numerical simulations show that power transfer will be periodical during coupling among parallel single-mode optical fibers. These results can be extended to multi-parallel single-mode optical fibers.
Analysis of Additional Phase Characteristics in Tapered Waveguides

QI Wei,YU Hui,HAO Yin-lei,YANG Jian-yi,WANG Ming-hua,JIANG Xiao-qing

IF: 0.6

2007-01-01

ACTA PHOTONICA SINICA

Abstract:Additional phase characteristics of different tapered waveguides are analyzed using both the presented approximate technique and the numerical method.The additional phase change is dependent on geometrical parameters and is sensitive to wavelength.Phase compensation employing a widened taper and a narrowed taper is proposed,which is linear and wavelength-insensitive.
Novel fiber taper for efficient optical interconnection

Xiaofeng Jin,Zhongxian Zhang

1998-01-01

Abstract:The optical fiber taper coupling with its refractive index gradually changing along its propagation axis caused by photosensitivity was analyzed theoretically. The numerical results for two different taper shapes in step-index fiber show that the coupling of fundamental mode to the reflected mode and to high-order mode are relatively small provided the change is gradual. The experiment demonstrates that this index taper is suitable for interconnection of two dissimilar fibers. It may also be applicable for coupling of laser sources or integrated waveguides to fibers.
Transmission Properties of the Single Mode Fiber with a Cross-Sectional Micro-Channel Investigated Using Time-Domain Finite Difference (FDTD) Method

Wei Hong,Dongning Wang,Dingshan Gao,Yuhua Li,Changrui Liao,Ying Wang,Shujing Liu,Xia Fang,Lina Ma

DOI: https://doi.org/10.1016/j.yofte.2011.07.016

2009-01-01

Abstract:Transmission of a single mode fiber with a cross-sectional micro-channel is investigated by two dimensional time-domain finite difference method for the first time. Index-sensing capabilities are defined from the simulation results.
Characteristic Analysis of Spatial Multiwaveguide System Based on Weakly Coupled-Mode Theory

Yiling Sun,Xiaoqing Jiang,Jianyi Yang,Minghua Wang

DOI: https://doi.org/10.3321/j.issn:0253-2239.2006.12.005

2006-01-01

Abstract:The coupling among waveguides on different planes occurs in both transverse and vertical directions. Using the spatial multiwaveguide system, we can interconnect devices in different layers effectively. Based on the weakly coupled-mode theory, the planar waveguide coupling theory is generalized to spatial multiwaveguide system, and the coupled-mode equations of the spatial multiwaveguide system are presented. As an application example, the coupled-mode equation is applied to analyze the coupling properties in spatial three-and four-waveguide systems. The analytical expressions of light intensity distributions and coupling length in the two specific cases are given, and the three-dimensional full-vector beam propagation method is used to verify the analytical results. The analysis result shows that the spatial multiwaveguide system permits uniform and nonuniform power splitting in two orthogonal directions. These analytical formulas are useful in designing three-dimensional directional couplers, which is based on spatial multiwaveguide coupling.
A general model for taper coupling of multiple modes of whispering gallery resonators and application to analysis of coupling-induced Fano interference in a single cavity

Shahab Bakhtiari Gorajoobi,Ganapathy Senthil Murugan,Michalis N Zervas

DOI: https://doi.org/10.1364/OE.27.025493

2019-09-02

Abstract:In this paper, we give a general model for analysis of multimode Whispering Gallery Mode (WGM) resonators coupled to multimode tapered fibers based on the coupled-mode theory. Such formulation takes into account the asymmetry of the taper-resonator coupling. Simulations for a microsphere show that the tapered fiber coupling mechanism induces cross-coupling between coherent orthonormal WGMs. We show that the degree of such cross-coupling depends basically on the fiber diameter, air-gap between the taper and resonator, intrinsic losses and eccentricity. The WGM cross-coupling affects the total transmission and spectral line-shape of the internal powers resulting in a controllable transformation of the line-shape to non-Lorentzian spectra. This analysis can be utilized to precisely determine the output and intra-cavity intensity of multimode microresonators, which is important in lasers, nonlinear optical signal generation and realization of optical delays.
Space-Frequency Domain Iterative Method for Modes Analysis of Planar Waveguides

Li Bingxin,Zhang Baorong

2015-01-01

Abstract:We describe a space-frequency domain iterative algorithm to analyze the modes of planar optical waveguides. The one dimensional Maxwell equation was transformed into space-frequency domain by Fourier transform, and became an integral equation which could be solved by an iterative method. For any refractive index profiles, the effective index and mode field distribution are given simultaneously. The numerical result shows that this method is accurate and flexible for planar optical waveguides with any structure.
Coupling characteristics of twin-core few-mode all-solid photonic bandgap fiber and their application in mode separation

Hongye Li,Zhi Wang,Yange Liu,Hu Liang,Simeng Han

DOI: https://doi.org/10.1364/JOSAB.34.001811

2017-01-01

Abstract:We theoretically investigate the coupling characteristics of a few-mode twin-core all-solid photonic bandgap fiber. We show that extrema in the coupling length, reversal of the ordering of supermodes, and complete decoupling can occur in high-order modes. Using significant differences in the coupling characteristics between different modes, we can separate degenerate mode pairs such as LP11a and LP11b, and LP21a and LP21b, as well as modes with the same azimuthal quantum number, e.g., LP01 and LP02. By setting a suitable photonic-crystal period, we can realize an optical fiber coupler with mode separation properties in the C-band. (C) 2017 Optical Society of America
Mode conversion in tapered submicron silicon ridge optical waveguides.

Daoxin Dai,Yongbo Tang,John E Bowers

DOI: https://doi.org/10.1364/OE.20.013425

IF: 3.8

2012-01-01

Optics Express

Abstract:The mode conversion in tapered submicron silicon ridge optical waveguides is investigated theoretically and experimentally. Two types of optical waveguide tapers are considered in this paper. One is a regular lateral taper for which the waveguide width varies while the etching depth is kept the same. The other is a so-called "bi-level" taper, which includes two layers of lateral tapers. Mode conversion between the TM fundamental mode and higher-order TE modes is observed in tapered submicron silicon-on-insulator ridge optical waveguides due to the mode hybridization resulting from the asymmetry of the cross section. Such a mode conversion could have a very high efficiency (close to 100%) when the taper is designed appropriately. This enables some applications e. g. polarizer, polarization splitting/rotation, etc. It is also shown that this kind of mode conversion could be depressed by carefully choosing the taper parameters (like the taper width, the etching depth, etc), which is important for the applications when low-loss propagation for the TM fundamental mode is needed. (C) 2012 Optical Society of America
Characteristics of minimum mode-field diameter in tapered fiber

REN Jian-guo,HU Zheng-liang,YANG Hua-yong,ZHANG Xue-liang,HU Yong-ming

DOI: https://doi.org/10.5768/JAO201233.0308002

2012-01-01

Journal of Applied Optics

Abstract:Mode-field diameter(MFD) is a characteristic parameter of fundamental mode in fiber-optics waveguide.Power density in single-mode fiber is inversely proportional to the MFD.As the single-mode output power of fiber laser increasing,the power density in the fiber increases intensely.Much higher power density can cause optical damage and thermal damage of fiber waveguide.Based on the approximate mode-field distribution model,a character was found that the minimum MFDs in tapered fibers with different original fiber parameters corresponded to an invariable fiber normalized frequency.The relations between the core diameters and MFDs were simulated by the finite difference beam propagation method(FD-BPM) in different wavelengths and in different core numerical apertures(NA).The results demonstrated the supposition presented above and indicated that the minimum MFDs corresponded to the normalized frequency 1.8 nearly,without direct relations with the wavelength and fiber para-meters.The results provide theoretical reference for the quick determination of the point of maximum power density in fiber,especially in high power case,as well as add new content to the fiber optics theories.
Theoretical analysis of the mode coupling induced by heat of large-pitch micro-structured fibers

zhang haitao,chen dan,hao jie,yan ping,gong mali,张海涛,陈丹,郝杰,闫平,巩马理

DOI: https://doi.org/10.1088/1674-1056/24/2/024208

2015-01-01

Chinese Physics B

Abstract:In this paper, a theoretical model to analyze the mode coupling induced by heat, when the fiber amplifier works at high power configuration, is proposed. The model mainly takes into consideration the mode field change due to the thermally induced refractive index change and the coupling between modes. A method to predict the largest average output power of fiber is also proposed according to the mode coupling theory. The largest average output power of a large pitch fiber with a core diameter of 190 mu m and an available pulse energy of 100 mJ is predicted to be 540 W, which is the highest in large mode field fibers.
Theoretical Analysis of the Mode Distortion Induced by Stimulated Raman Scattering Effect in Large-Mode Area Passive Fibers

Chun Zhang,Rumao Tao,Min Li,Xi Feng,Ruoyu Liao,Qiuhui Chu,Lianghua Xie,Haokun Li,Benjian Shen,Lixin Xu,Jianjun Wang

DOI: https://doi.org/10.1109/jlt.2022.3215659

IF: 4.7

2023-01-15

Journal of Lightwave Technology

Abstract:By employing the mode decomposition method to study the relative mode evolution characteristics during the stimulated Raman scattering (SRS) process, a numerical model of the core-pumped Raman effect in few-mode fibers has been proposed, which provides an accurate tool to reveal the underlying physical mechanism of SRS-induced mode distortion. Mode distortion induced by the SRS effect in large-mode area passive fibers has been investigated numerically. It reveals that the few-mode SRS effect can result in an irreversible power transfer from the signal fundamental mode (FM) to signal high order modes (HOMs), which is a static phenomenon, different from the SRS-induced transverse mode instability. To the best of our knowledge, it is the first time that the numerical results coincide with the experimental phenomenon. Simulation results also illustrate that the inter-mode wave-mixing effect among the signal FM and signal HOMs plays a key role in the signal power transfer. With the help of the numerical model, mitigation strategy by designing and using the Raman-gain-tailored fiber has also been proposed, which shows a clear advantage in suppressing SRS-induced mode distortion.

engineering, electrical & electronic,optics,telecommunications

Mode Transmission Analysis of Tapered Fiber Based on Coupled Local Mode Theory

Coupled mode theory analysis of mode-splitting in coupled cavity system.

Optical Fiber Index Taper–Theoretical Analysis and Experiment Demonstration

Study of mode propagation with 632.8-nm laser in tapered fiber

Modeling electromagnetic wave coupling and mode conversion effects in multitwisted bundle of twisted-wire pairs (MTB-TWP) above ground plane

Mode Coupling Strength in A Microsphere Cavity Coupled with Fiber Taper

Analysis of Power Transfer Characteristics Among Many Parallel Optical Fibers

An Multi-to-single Mode Conversion Experiment Using the Tapered Fiber

Taper-Microsphere Coupling with Numerical Calculation of Coupled-Mode Theory

Power Transfer Characteristics among N Parallel Single-Mode Optical Fibers

Analysis of Additional Phase Characteristics in Tapered Waveguides

Novel fiber taper for efficient optical interconnection

Transmission Properties of the Single Mode Fiber with a Cross-Sectional Micro-Channel Investigated Using Time-Domain Finite Difference (FDTD) Method

Characteristic Analysis of Spatial Multiwaveguide System Based on Weakly Coupled-Mode Theory

A general model for taper coupling of multiple modes of whispering gallery resonators and application to analysis of coupling-induced Fano interference in a single cavity

Space-Frequency Domain Iterative Method for Modes Analysis of Planar Waveguides

Coupling characteristics of twin-core few-mode all-solid photonic bandgap fiber and their application in mode separation

Mode conversion in tapered submicron silicon ridge optical waveguides.

Characteristics of minimum mode-field diameter in tapered fiber

Theoretical analysis of the mode coupling induced by heat of large-pitch micro-structured fibers

Theoretical Analysis of the Mode Distortion Induced by Stimulated Raman Scattering Effect in Large-Mode Area Passive Fibers