Abstract:Masonry structure is heterogeneous and has been widely used in building and construction engineering. The study on cracking pattern of masonry structure is significant to engineering design. Many previous investigations on the failure process of masonry structure are usually based on the homogenization technique by selecting a typical unit of masonry to serve as a representative volume. This kind of numerical analysis neglects the mesoscopic heterogeneous structure, which cannot capture the full cracking process of masonry structures. The cracking process of masonry structure is dominantly affected by its heterogeneous internal structures. In this paper, a mesoscopic mechanical model of masonry material is developed to simulate the behavior of masonry structure. Considering the heterogeneity of masonry material, based on the damage mechanics and elastic-brittle theory, the new developed Material Failure Process Analysis (MFPA2D) system was put forward to simulate the cracking process of masonry structure, which was considered as a two-phase composite of block and mortar phases. The crack propagation processes simulated with this model shows good agreement with those of experimental observations. The numerical results show that numerical analysis clearly reflect the modification, transference and their interaction of the stress field and damage evolution process which are difficult to achieve by physical experiments. It provides a new method to research the forecast theory of failure and seismicity of masonry. It has been found that the fracture of masonry observed at the macroscopic level is predominantly caused by tensile damage at the mesoscopic level.

Numerical Simulation And Its Experimental Test On Cracking Process Of Masonry Structures

Numerical simulation of crack formation process and the mechanic characters of masonry structure

Numerical Study on Cracking Process of Masonry Structure

NUMERICAL MODEL AND SIMULATION OF MASONRY FRACTURE PROCESS

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Numerical Simulation of the Failure Process of Unreinforced Masonry Walls Due to Concentrated Static and Dynamic Loading

Implementation of a Mesoscopic Mechanical Model for the Shear Fracture Process Analysis of Masonry

Simulation and Experimental Verification of the Non-Uniform Corrosion Cracking Process of Reinforced Mortar Specimen

Analysis of the Shear Failure Process of Masonry by Means of A Meso-Scopic Mechanical Modeling Approach

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Numerical Simulation of Crack Development in Reinforced Concrete Structures under Eccentric Loading

Numerical Study on Crack Distributions of the Single-Layer Building under Seismic Waves

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

A numerical model for non-linear dynamic analysis of masonry structures subjected to ground motion

Numerical Simulation of Masonry-Infilled RC Frames Using XFEM

Numerical Simulation on Shear Fracture Process of Concrete Using Mesoscopic Mechanical Model

Application of Finite Element Analysis in Masonry Structures

Numerical Simulation of Crack Development in Reinforced Concrete Structures

Numerical Study on the Influence of Mesomechanical Properties on Macroscopic Fracture of Concrete