Abstract:Ultrafine iron ore concentrate pose challenges like poor pellets formation performance, low-bursting temperature, and a complex drying thermal regime. To examine the drying characteristics of green pellets of ultrafine iron ore concentrate, we employed Weibull distribution function and Dincer model to fit and analyze the corresponding drying curve. The effects of drying temperature and air speed on the strength of dried pellets were also studied. Our findings reveal that the drying process of green pellets of ultrafine iron ore concentrate involves three stages: ascending speed, constant speed, and descending speed. As the drying temperature and air speed increase, the drying time decreases. The coefficient of determination R2 for the fitted Weibull distribution function model ranged from 0.995 to 0.998, while the R2 value for the Dincer model ranged from 0.990 to 0.996. Both fitted models align with experimental data and prove to be effective. According to the Bi values obtained through the Dincer model, raising the drying air speed in the initial stage and the drying air temperature in the subsequent stage of the drying system can efficiently remove moisture, reduce green pellets rupture risk, and maintain productivity. The moisture diffusion coefficient and convective mass transfer coefficient increase with rising temperature and air velocity, following the order of Deff > Dcal > D*eff as determined by the Weibull distribution function, Dincer model, and Fick's second law. Additionally, the activation energy value of ultrafine iron ore concentrate for drying derived from the Arrhenius formula is 4515.60 J/(mol?K). Notably, increasing drying temperature increases the strength of dried particles due to their more compact and dense internal structure. This study offers theoretical support for simulating the drying of green ultrafine iron ore concentrate pellets and provides guidelines for selecting diverse drying conditions and designing drying equipment.

Experimental Study On The Drying Characteristics Of Flake Graphite

Fluidized Bed Drying and Devolatilization of Lignite Washery Tailing Particles: Experiments and Modeling

Experimental Research on Single Lignite Particle Drying Process in Hot Gas

Experimental Study on Drying Characteristics of Wet Fly Ash

Experimental investigation of mechanical characteristics of coal samples at different drying temperatures

Study on Dehumidification of Carbon Materials Based on Thermogravimetry

Numerical research on the drying process of single lignite particle by high temperature flue gas

Effects Of Heat-Treatment Temperature And Binder Content On The Microstructure And Thermal Conductivity Of Graphite Flake-Carbon Composites

Analysis on Moisture Transfer Behavior in Dehumidifying Process of Low Moisture Content Graphite

Hydration and dewetting near graphite-CH(3) and graphite-COOH plates.

Effects of graphene irradiation plates and infrared temperature on the physiochemical, morphological, structural, and pasting properties of corn flour

Experimental Study on Drying and Reabsorption of the Lignite of Ximeng

Experimental and Numerical Investigation of Lignite Particle Drying in A Fixed Bed

Experimental and Numerical Investigation of Convective Drying of Single Coarse Lignite Particles

An Experimental Study on the Drying Kinetics of Lignite in High Temperature Nitrogen Atmosphere

Study on fluidization characteristics and drying characteristics of fine coal in thermal vibration separation fluidized bed

Influence of graphite oxide drying temperature on ultra-fast microwave synthesis of graphene

Numerical simulation of single lignite particle drying process in high temperature flue gas

Study on the drying characteristics of green pellets of ultrafine iron ore concentrate

Molecular Simulation and Experimental Investigation of Thermal Conductivity of Flexible Graphite Film

Preparation and its thermal properties of graphite flakes/Al composites by pressure infiltration method