Abstract:In the present study, cellulose was effectively separated from eucalyptus wood with ternary solvents containing organic base 1,1,3,3-tetramethyl guanidine and other organic solvents such as morpholine, N-ethyl morpholine, dimethyl formamide, glycerin, ethylene glycol and diethylene glycol. It was found that the combination of 1,1,3,3-tetramethyl guanidine with morpholine was favorable for achieving high delignification and less loss of cellulose. The removal of lignin and hemicellulose achieved 89.8% and 81.4% after heating for 6 h at 160 °C, respectively. It was found that the combination of 1,1,3,3-tetramethyl guanidine with morpholine was favorable for achieving high delignification and less loss of cellulose. The removal of lignin and hemicellulose achieved 89.8% and 81.4% after heating for 6 h at 160 °C, respectively. The addition of morpholine and water promoted the dissolution of lignin and reduced the degradation of cellulose. Subsequently, the crude cellulose was further purified through a simplified bleaching process, the final removal of lignin and hemicellulose increased to 98.7% and 97.5% respectively, and cellulose with a purity of 96.9% was achieved. The scanning electron microscopy analysis indicated that the diameter of cellulose bundles decreased from about 250 μm to about 20 μm after organic solvents treatment. The fiber bundle was completely separated into a single fiber with a diameter of about 5–10 μm after bleaching process. X-ray diffraction analysis revealed an increase in the crystallinity of fiber from 69.4% to 83.3%, implying a reduction of lignin and hemicellulose in eucalyptus. Fourier transform infrared spectra revealed the high selective removal of lignin and hemicellulose. Two-dimensional 1 H- 13 C Heteronuclear singular quantum correlation was performed to investigated the structure units and linkages of lignin and found that only the structural signal of C 5 -H 5 in guaiacyl (G 5 ) alone existed in the aromatic region, while the signals -OCH 3 , C γ –H γ in β-O-4' (A γ ) and β-β' (C γ ) remained in the side chain region, indicating that lignin could be effectively degraded and dissolved by the ternary solvents. In conclusion, high purity cellulose was obtained from eucalyptus wood by environmentally friendly and recyclable processes.

Effects of Lc-Refining on Fiber Surface Chemistry of Eucalyptus

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Effect of Lye Disposal and Draw on Performance of Floss Silk

Toward an understanding of the increase in enzymatic hydrolysis by mechanical refining

Effect of pulp refining on mechanical and electrical properties of insulating presspaper

Effects of Continuous Steam Explosion on the Microstructure and Properties of Eucalyptus Fibers

EFFECT OF WOOL SURFACE MODIFICATION ON WATER REPELLENT AND OIL REPELLENT FINISHINGS

MECHANICAL PULPING.Effect of long fibre concentration on low consistency refining of mechanical pulp

Effects of hydrothermal processing on the cellulosic fraction of Eucalyptus globulus wood

Application of fiber modification enzymes in the refining of fine papers

THE REFINING OF REED PULP

Mechanical Strength, Thermal Stability, and Hydrophobicity of Fiber Materials after Removal of Residual Lignin

Efficient removal of residual lignin from eucalyptus pulp via high-concentration chlorine dioxide treatment and its effect on the properties of residual solids

Effects of removal of extractives on the chemical composition and mechanical properties of wood

Fractional separation of cellulose from eucalyptus wood through ternary solvents and simplified bleaching treatment

Selective fractionation and enzymatic hydrolysis of Eucalyptus nitens wood

Effect of high residual lignin on the properties of cellulose nanofibrils/films

Development of fibre properties in mill scale: high- and low consistency refining of thermomechanical pulp (part 2) – Importance of fibre curl

Delignification of wood fibers using a eutectic carvacrol–methanesulfonic acid mixture analyses of the structure and fractional distribution of lignin, cellulose, and hemicellulose