Abstract:Rotating instability (RI) is an obvious unsteady flow phenomenon occurring in the tip region of compressors, which is potentially linked to tip clearance flow noise, blade vibration and rotating stall/surge. The existing investigations for RI indicate the origins of RI are closely related to unsteady flow behaviors in given blade passages in the rotating reference frame, which depend on the design specifics of axial machines. However, no efforts are made to set up a quantitative link between the time scale of unsteady behavior in a given passage and the characteristic parameters of RI, let alone to define the fluid dynamic processes/events which are causally linked with the RI inception. This is the motivation for the current investigations. In Part I, the experimental and numerical investigations are carried out to investigate tip flow unsteadiness in a subsonic axial compressor rotor. The measurement results show RI appears at operating points near the stability limit of the test rotor. It becomes more pronounced with mass flow rate decreased. The corresponding computational experiments show that flow unsteadiness in given passages also appears close to the stability limit with its initial origination confined to the tip region. The appearance of tip flow unsteadiness is accompanied by a phase lag pattern in different passages across the circumference similar to the detection of stall flutter. The well-developed Fourier-decomposed method is thus used to evaluate the mode characteristics of circumferential traveling waves. It turns out the circumferential traveling wave rotating against the rotor rotation direction with the mode order of 4 is prominent in the flow field with its frequency in the absolute frame equivalent to the mean frequency value of RI detected in measurements. The further analyses of the simulated flow fields indicate that tip flow unsteadiness in a given passage attributes to the periodic oscillation of “secondary clearance flow”, which induces a blockage tranfer across the passage. The mode order and propagation speed of RI depend on the blockage transfer induced by the periodic oscillation of “secondary clearance flow” between two neighbouring passages along the whole circumference. The investigation results presented in the paper implies that one of early ideas to interpret the origin of RI might be altered to such an extent that it contains any unsteady behavior associated with tip leakage flow, rather than limited to “periodical oscillation of tip leakage vortex”.

Origins and Structure of Rotating Instability: Part 1 — Experimental and Numerical Observations in a Subsonic Axial Compressor Rotor

Origins and Structure of Rotating Instability-Part 2: Numerical Observations in A Transonic Axial Compressor Rotor

Experimental Detection of Rotating Instability and Exploration of Its Flow Mechanism in an Axial Flow Compressor Rotor

Investigation into the flow mechanism of rotating instability in a subsonic axial flow compressor rotor

Investigation Into Flow Mechanism Leading To The Step Change In Aerodynamic Modes Of Rotating Instabilities In A Subsonic Axial Compressor Rotor

Experimental Study on Time-Frequency Characteristics of Rotating Instability in an Isolated Axial Compressor Rotor with Variable Clearance

The Tip Leakage Vortex Breakdown and its Possible Relationship With Rotating Instability in a Subsonic Compressor Rotor

Tip leakage flow, tip aerodynamic loading and rotating instability in a subsonic high-speed axial flow compressor rotor

Circumferential Propagation Characteristic Of Unsteady Flow In A Subsonic Axial Flow Compressor Rotor At Different Reynolds Numbers

Tip Flow on Rotating Instability on an Axial Compressor with Different Tip Clearances

Rotating Instabilities in a Low-Speed Single Compressor Rotor Row with Varying Blade Tip Clearance

On the Mode Characteristics of Rotating Instability with Different Tip Clearances

Criteria for the Occurrence of Tip Leakage Flow Induced Rotating Instability

Numerical investigation into rotating instability and the vortex structure near the tip in a transonic compressor rotor

Numerical Investigation on the Flow Mechanism of Multi-Peak Frequency Feature of Rotating Instability

Investigation on Rotating Instability in an Axial Compressor with Different Inlet Reynolds Numbers

Experimental Investigation of Rotating Instability in a Contra-Rotating Axial Flow Compressor

Numerical Investigation into the Mechanism Regarding the Inception and Evolution of Flow Unsteadiness Induced by the Tip Leakage Flow in a Transonic Compressor

Experimental and Numerical Investigation of Near-Tip Flow-Field in an Axial Flow Compressor Rotor-Part Ⅱ: Flow Characteristics at Near-Stall Operating Conditions

The Investigation on Vortex Breakdown Prior to Stall in a Compressor Rotor with Non-Uniform Tip Clearance

Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor