Abstract:The Fenton process is used as a tertiary treatment to remove organic pollutants from the effluent of bio-treated pharmaceutical wastewater (EBPW). The optimal and most appropriate Fenton conditions were determined by an orthogonal array test and single-factor experiments. The removal of chemical oxygen demand (COD) was influenced by the following factors in a descending order: H2O2/Fe(II) molar ratio > H2O2 dosage > reaction time. Under the most appropriate Fenton conditions (H2O2/Fe(II) molar ratio of 1:1, H2O2 dosage of 120 mg L−1 and reaction time of 10 min), the COD and dissolved organic carbon (DOC) were removed with efficiencies of 62 and 53%, respectively, which met the national discharge standard (GB 21903-2008) for the Lake Tai Basin, China. However, the Fenton treatment was inadequate for removal of N compounds, and the removal of organic nitrogen led to an increment in N-NH3 from 3.28 to 19.71 mg L−1. Proteins and polysaccharides were completely removed, and humic acids (HAs) were partly removed with an efficiency of 55%. Three-dimensional excitation/emission matrix spectra (3DEEMs) indicated complete removal of fulvic acid-like substances and 90% reduction in the florescence intensity of humic acid-like substances. Organic pollutants with molecular weights (MW) > 10 kDa were completely removed, MW 5–10 kDa were degraded into smaller MW ones, and some low molecular weight acids (MW 0.1–1 kDa) were mineralized during the Fenton process. Some species, including pharmaceutical intermediates and solvents were detected by gas chromatography-mass spectrometry (GC-MS). The operational costs of the Fenton’s treatment were estimated to be 0.58 yuan RMB/m3 EBPW based on reagent usage and iron sludge treatment and disposal.

Treatment Of Wastepaper Pulping Effluents By Fenton Process

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

[Fenton Technique for Oxidation Treatment of Solid-Waste Containing Aniline].

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Fenton Treatment of Bio-Treated Fermentation-Based Pharmaceutical Wastewater: Removal and Conversion of Organic Pollutants As Well As Estimation of Operational Costs

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Application analysis of Fenton /flocculation process for advanced treatment of pulp and papermaking wastewater

Experiment study on the Fenton oxidation advanced treatment of bio-treated tannery wastewater

TREATMENT OF BIO-POLLUTED WASTEWATER BY FENTON OXIDATION

Treatment of Oilfield Wastewater by Fenton'S Process

Pretreatment of Wastewater from P-Tert-butylphenol Formaldehyde Resin Synthetic Process by Ferric-carbon Micro-electrolysis and Fenton Reagent

Pretreatment of wastewater from fumaric acid production by extraction-Fenton oxidation process

Pretreatment of Landfill Leachate by Fenton Process

Study on Hair Dyeing Wastewater by Fenton Oxidation Method

Optimization of Fenton treatment process for degradation of refractory organics in pre-coagulated leachate membrane concentrates.

Integrated Process Combined with Fenton Reaction for the Treatment of Papermaking Deinking Wastewater

Landfill Leachate Treatment by Coagulation/flocculation Combined with Microelectrolysis-Fenton Processes

Application of hydrolytic acidification- aerobic biological treatment - fenton process in pulping and papermaking wastewater treatment

Advanced Treatment of Paper Mill Wastewater Using Electro-Fenton Process with Novel Catalytic Particle Electrodes

Treatment of Dyeing Wastewater by Photo-assisted Fenton System

ADVANCED TREATMENT OF AVERMECTIN WASTERWATER BY FENTON REAGENT