Abstract:Laminated composite structures, while offering weight savings compared with their metal counterparts, are susceptible to ply separation, (i.e., delamination mode of failure) due to the lack of through-thickness fiber reinforcements. In this paper, numerical simulations are used to gain an enhanced understanding of angled composite beam delamination when subjected to four-point bending consistent with the ASTM D-6415 test standard, with an expectation that the learning gained from this work is extensible to laminated composite components in general. While illustrating mesh sensitivity, manufacturing and frictional effects, four items of interest are examined: (1) the undamaged state/pre-peak load response, (2) the through-thickness peak tensile capability, (3) the post-peak load drop, and (4) the subsequent post-peak damaged response. A Finite Element Analysis (FEA) model is developed that incorporates the Smeared Crack Approach (SCA) to capture progressive failure modes within the element formulations directly, effectively eliminating the need for a priori specification of discrete delamination zones. The ability to incorporate failure directly within the element structure is particularly notable where laminates may not realistically permit a high number of interface layers or where geometry may be complex. Leveraging experimental data of curved composite laminates subject to four-point bending, the proposed approach successfully predicts the correct behavior throughout the damage progression. Additionally, this study offers an insight into effects of manufacturing-induced imperfections and frictions between the specimen and fixture on the prediction of inter-laminar strength of a curved composite part.

Simulating the Mixed-Mode Progressive Delamination in Composite Laminates

A Semi-Analytical Method for Determining the Mode-I Delamination R-curve and Fiber Bridging Traction-Separation Law of Double-double Laminates

Status of Numerical Simulation Methods for Delamination Damage of Composite Laminates

Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements

Analysis of Residual Compressive Strength of Composite Laminates with Delamination

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Evaluations on VCCT and CZM methods of delamination propagation simulation for composite specimens

Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials

Application of a delamination model to laminated composite structures

Integrated XFEM-CE Analysis of Delamination Migration in Multi-Directional Composite Laminates

Delamination Propagation Manipulation of Composite Laminates under Low-Velocity Impact and Residual Compressive Strength Evaluation

A modified mode I cohesive zone model for the delamination growth in DCB laminates with the effect of fiber bridging

XFEM Simulation of Delamination in Composite Laminates

XFEM Simulation of Delamination in Composite Laminates Part A Applied Science and Manufacturing

Numerical Analysis of Delamination Behavior in Laminated Composite with Double Delaminations Embedded in Different Depth Positions

Delamination Propagation and Compressive Strength Prediction of Laminated Composite

A New Mechanism Based Cohesive Zone Model for Mode I Delamination Coupled with Fiber Bridging of Composite Laminates

Progressive failure simulation of angled composite beams subject to flexural loading

Numerical Study of Cohesive Zone Approach for Simulation of Delamination in Laminated Composites

A progressive failure model for composite laminates with initial delamination under compressive loading

Numerical investigation of two-dimensional Mode-II delamination in composite laminates