Abstract:Flexoelectric material under certain inhomogeneous electric field can be utilized to control the vibration of flexible structure based on the converse flexoelectric effect. The atomic force microscope (AFM) probe placed on the top of flexoelectric patch and the electrode under it with certain voltage applied between them are used to generate the inhomogeneous electric field. The actuation membrane force and bending moment induced by flexoelectric patch in turn influence the vibration of shells. In this study, an elastic cantilever beam excited by an initial static mechanical force locating at the tip end is considered. As the mechanical force withdraws the snapback response appears where the cantilever beam vibrates with all mode participating and their amplitudes decaying exponentially. Multiple actuators, consist of AFM probes and flexoelectric patches, are used here to accelerate the decrease of snapback response. On each probe voltages of multiple frequencies are applied to obtain the control effects on multiple modes. The actuator’s positions minimizing the tip displacement of the beam is selected as the optimal ones. Two way of determining the control voltage, i.e., open loop and close loop, is introduced and the information of positions of the actuators are emphasized in both methods. In case studies, the free damping vibration of the beam without control is evaluated and the first mode dominates the vibration. The open loop method, with constant amplitude of control voltage, doesn’t work well in a relatively long time scale. While the close loop method, with its control voltage related to the tip displacement detected by a sensor, turns out to be more stable and effective. The optimal positions for the actuations of both methods are clustered near the fixed end, where the actuation factor reaches its maximal value. At last, limitation on voltage amplitude is implemented to avoid the stress concentration, under which the control effect does not weaken much. This study serves as an introduction to flexoelectric material & multiple AFM probe based vibration control and a theoretical foundation for further researches.

Vibration control of a rotating cantilever beam by using the giant magnetostrictive actuator

Vibration Suppression of a Rotating Cantilever Beam under Magnetic Excitations by Applying the Magnetostrictive Material

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Active Vibration Control of Flexible Structures with Super-Coiled Actuators

Active Control on Coupled Bending-Torsion Vibration of Two-Link Space Flexible Component

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Active Vibration Control of Nonlinear Giant Magnetostrictive Actuators

DYNAMIC CONTROL OF TENSION STRUCTURES

Controllability of conducting structures using magnetoelastic damping

The Model of Active Vibration Control Based on Giant Magnetostrictive Materials

Active Vibration Control of Terfenol-D Rod of Giant Magnetostrictive Actuator with Nonlinear Constitutive Relations

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Active Vibration Control of Composite Cantilever Beams

Stochastic Vibration Suppression Analysis of an Optimal Bounded Controlled Sandwich Beam with MR Visco-Elastomer Core

Multiflexoelectric Actuation and Control of Beams

Research on giant magnetostrictive actuator for turning vibration control

Dynamic Actuation and Quadratic Magnetoelastic Coupling of Thin Magnetostrictive Shells

Control of Beam’s Snapback Responses Using Multiple Flexoelectric Actuators

Numerical Simulation of Nonlinear Dynamic Responses of Beams Laminated with Giant Magnetostrictive Actuators

Nonlinear Vibration of a Rotating Cantilever Beam in a Surrounding Magnetic Field

Effects of magnetic field distribution on micro-vibration response of magneto-rheological visco-elastomer based sandwich beam