Abstract:In order to regulate the surface properties of calcined kaolinite for the purpose of achieving uniform distribution within various polar dispersion media, 3-aminopropyltriethoxysilane and phenyl glycidyl ether were employed to chemically modify calcined kaolinite. The grafting rate, surface properties, and dispersion properties of calcined kaolinite particles in different polar organic media were changed by varying the dosage of the modifiers. FT-IR analysis confirmed successful surface modification, while thermogravimetric analysis indicated a maximum graft coverage of 18.44 μmol/m2 for the modified particles. Contact angle measurements and particle size distribution analyses demonstrated the effective adjustment of surface characteristics by the modifiers. Specifically, at a mass ratio of 1.0 of modifier to kaolinite particles, the modified particles exhibited a contact angle of around 125°, achieving uniform dispersion in different polarity media. Particle size distribution ranged from 1600 nm to 2100 nm in cyclohexane and petroleum ether, and from 900 nm to 1200 nm in dioxane, ethyl acetate, and DMF, showcasing a significant improvement in dispersion performance compared to unmodified particles. Concurrently, to improve the mechanical properties of PBAT, modified particles were incorporated into the PBAT matrix, and the effect of modified particle addition on the tensile strength and fracture tensile rate of the composites was investigated. The optimal amount of modified particles is 6 wt.%~8 wt.%. This article aims at synthesizing modifier molecules containing different hydrophilic and hydrophobic groups to chemically graft onto the surface of calcined kaolinite. The hydrophilic and hydrophobic groups on the modified particles can adapt to dispersed systems of different polarities and achieve good distribution within them. The modified particles are added to PBAT to achieve good compatibility and enhance the mechanical properties of the composite material.

Calcination Of Bath Kaolin And Its Dispersing Performance

MECHANISM OF PHYSICOCHEMICAL CHANGE OF CALCINED KAOLINITE FROM MAOMING

Facile One-Step Microwave-Assisted Modification of Kaolinite and Performance Evaluation of Pickering Emulsion Stabilization for Oil Recovery Application.

A Study on Calcinated Whitening Technology of Kaolin in Benxi Formation, Jiaozuo Area

Effect of Dispersants on the Stability of Calcite in Non-Polar Solutions

Effect of Dispersants Pre-Adsorption and Grinding on Dispersion Performance of Kaolin Pigment

The Role of Exfoliated Kaolinite on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene Oxide)/kaolinite Composites

Regulation of Reactivity of Calcined Ultrafine Kaolin Products

Synthesis of New Kaolin Molecular Sieves from Kaolin and Its Adsorption of Nh4+

Calcination Of Kaolinite And Synthesis Of 4a Zeolite Used In Detergent With Microwave Method

Controlling and Tuning the Dispersion Properties of Calcined Kaolinite Particles in Various Organic Solvents via the Modification Method Using Triethoxyvinylsilane and 3-Mercaptopropionic Acid

Surface Modification of Calcined Kaolinite for Enhanced Solvent Dispersion and Mechanical Properties in Polybutylene Adipate/Terephthalate Composites

Effect of rice hulls additions and calcination conditions on the whiteness of kaolin

Influence of Calcination Temperature of Kaolin on the Structure and Properties of Final Geopolymer

Influence of calcination temperature on the physical and chemical characteristics of kaolinitic clays for use as supplementary cementitious materials

Study on the dispersion stability of kaolin in oil phase

Influences of Bentonite Modification Methods on the Physical and Chemical Properties of Bentonite

Study of Structural Transformation and Chemical Reactivity of Kaolinite-Based High Ash Slime during Calcination

Effect of particle size of associated rare earth kaolin powder on the sintering and properties of synthetic mullite

Specific Surface Area and Oil Adsorption of Calcinated Kaolin Clay

Study on the Activity of Metakaolin Produced by Traditional Rotary Kiln in China