Abstract:BackgroundPopulus (poplar) tree species including hybrid varieties are considered as promising biomass feedstock for biofuels and biochemicals production due to their fast growing, short vegetative cycle, and widely distribution. In this work, poplar was pretreated with acetic acid (AC) to produce xylooligosaccharides (XOS), and hydrogen peroxide–acetic acid (HPAC) was used to remove residual lignin in AC-pretreated poplar for enzymatic hydrolysis. The aim of this work is to produce XOS and monosaccharides from poplar by a two-step pretreatment method.ResultsThe optimal conditions for the AC pretreatment were 170 °C, 5% AC, and 30 min, giving a XOS yield of 55.8%. The optimal HPAC pretreatment conditions were 60 °C, 2 h, and 80% HPAC, resulting in 92.7% delignification and 87.8% cellulose retention in the AC-pretreated poplar. The two step-treated poplar presented 86.6% glucose yield and 89.0% xylose yield by enzymatic hydrolysis with a cellulases loading of 7.2 m/g dry mass. Very high glucose (93.8%) and xylose (94.6%) yields were obtained with 14.3 mg cellulases/g dry mass. Both Tween 80 and β-glucosidase enhanced glucose yield of HPAC-pretreated poplar by alleviating the accumulation of cellobiose. Under the optimal conditions, 6.9 g XOS, 40.3 g glucose, and 8.9 g xylose were produced from 100 g poplar.ConclusionsThe AC and HPAC pretreatment of poplar represented an efficient strategy to produce XOS and fermentable sugars with high yields. This two-step pretreatment was a recyclable benign and advantageous scheme for biorefinery of the poplar into XOS and monosaccharides.

Study On Soda-Aq Pulping Of The Fast-Growing Poplar With Pretreatment Processes

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

Two-step hydrogen peroxide-acetic acid and sodium hydroxide-urea pretreatment for saccharification of lignin-rich poplar

Delignification of Sugarcane Bagasse with Alkali and Peracetic Acid and Characterization of the Pulp

Enhancing Hemicellulose Recovery and the Enzymatic Hydrolysis of Cellulose by Adding Lignosulfonates during the Two-Stage Steam Pretreatment of Poplar

Highly-efficient pretreatment using alkaline enhanced aqueous deep eutectic solvent to unlock poplar for high yield of fermentable sugars: Synergistic removal of lignin and mannan

A new surfactant assisted acid prehydrolysis process for enhancing biomass pretreatment

Pretreatment of corn stover and hybrid poplar by sodium hydroxide and hydrogen peroxide

Study on the nitric acid pulping, delignification course, and waste-liquid recovery

Single-Stage Pulping of Sugarcane Bagasse with Peracetic Acid

Effect of Modification with ACQ-D on Mechanical and Sorption Isotherm Performance of Fast-Growing Poplar Wood

In-situ lignin sulfonation for enhancing enzymatic hydrolysis of poplar using mild organic solvent pretreatment

Balancing the effect of pretreatment severity on hemicellulose extraction and pulping performance during auto-hydrolysis prior to kraft pulping of acacia wood

Minimizing water consumption for sugar and lignin recovery via the integration of acid and alkali pretreated biomass and their mixed filtrate without post-washing

Conversion of control and genetically-modified poplar into multi-scale products using integrated pretreatments

Effects of High-Temperature Heat Treatment Modification by Impregnation on Physical and Mechanical Properties of Poplar

Effect of peracetic acid generation in hydrogen peroxide-acetic acid pretreatment on production of xylooligosaccharides from poplar by organic acid hydrolysis

Production of xylooligosaccharides and monosaccharides from poplar by a two-step acetic acid and peroxide/acetic acid pretreatment

Effect and optimization of NaOH combined with Fenton pretreatment conditions on enzymatic hydrolysis of poplar sawdust