Abstract:The object of research is the black liquor of the alkaline pulping sample Paulownia Clone in Vitro 112® with active alkali consumption of 14, 18 and 22 % in Na2O units from the mass of completely dry raw materials. The problem solved in the work is related to the formation of waste in the form of black liquor during pulp production. It is noted that as a result of the production of 1 ton of cellulose, up to 7 tons of black liquor is formed. In the course of the work, an analysis of the total titrated and active alkalinity in the white and black liquor after cooking paulownia wood was carried out, and the pH value was determined. The dependence of the content of dry substances in black liquor on the consumption of active alkali, the duration of cooking, the presence of a catalyst, and the final temperature of the delignification process is given. The amount of organic and mineral components of dry substances of black liquor per 1 ton of air-dry fibrous semi-finished products was calculated. It was established that with an increase in temperature by 20 °C (from 150 to 170 °C) and a duration of approximately 1.5 times (from 60 to 90 min and from 90 to 150 min), with the same consumption of active alkali and the use of a catalyst in the conditions after sodium pulping, the content of dry substances in the black liquor increases by 1.5–3 %. This regularity is explained by the transition into the solution of a greater number of dissolution products of lignin, hemicelluloses, and mineral substances. Estimated values for the content of mineral and organic substances in black liquor after cooking paulownia wood for a duration of 150 min and a final temperature of 170 °C at different consumptions of active alkali and the use of catalysts in the form of anthraquinone and ethyl alcohol are within the range of 1024-1518 kg per 1 ton dry pulps of normal yield and can be used in practice. The obtained results can be used to form an assessment of the black liquor as an additional resource potential for the economy of production.

Study on the nitric acid pulping, delignification course, and waste-liquid recovery

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

Recycle cooking wood chips with the residue liquid removed out of lignin by calcification for increasing pulp yield and reducing waste water discharge

Optimization of Determination Process of Cellulose Content with Pine Sawdust and Nitric Acid-ethanol Method

Overview of Organic Acid Pulping

Highly efficient lignin removal from the waste liquor of chemical pulping with an integrated polyaluminium chloride-assisted acidification/activated carbon adsorption process

Green wood pulping processes with high pulp yield and lignin recovery yield by deep eutectic solvent and its aqueous solutions

Feasibility of recycling the filtrate from acidified black liquor for alkaline pulping of golden bamboo grass

Minimizing water consumption for sugar and lignin recovery via the integration of acid and alkali pretreated biomass and their mixed filtrate without post-washing

Preparation of Pulp Refining Additive from Paper Sludge Through Organic Modification

Delignification of Sugarcane Bagasse with Alkali and Peracetic Acid and Characterization of the Pulp

On the Effect of Hot-Water Pretreatment in Sulfur-Free Pulping of Aspen and Wheat Straw

Recent advances in the treatment of lignin in papermaking wastewater

Pretreatment efficacy and lignin solubility of organic solvents on juvenile slash pine chips for lignin value prior to pulping

Low-temperature highly selective water delignification based on geopolymer materials

A comprehensive review of recent advances in delignification technology

Characteristics of black liquor after alkaline delignification of paulownia wood

Enhanced Performance of Lignin Recovery with a Carbon Dioxide Acidification Method

Exploring the effect of lignin on the chemical structure and microstructure of Chinese fir wood by segmental delignification

Preparation of Dissolving Pulp by Combined Mechanical and Deep Eutectic Solvent Treatment