Abstract:Interlaminar fracture is the most common type of failure in polymeric textile composites because these composites are prone to delaminate under the influence of external loading. Depending on the type of loading, the delamination in textile composites can be classified into Mode-I, Mode-II, Mode-III, and Mixed Mode-I/II interlaminar fracture. In this research work, Mode-I interlaminar fracture modeling of a double cantilever beam (DCB) composite laminate is performed on ABAQUS software as a cost-effective approach. The finite element-based fracture modeling techniques, virtual crack closure technique (VCCT), cohesive zone modeling (CZM), and extended finite element method (XFEM) were employed under the two-dimensional and three-dimensional interlayer crack propagation to evaluate several load–displacement responses. The top and bottom parts of the DCB specimen were bonded to each other by defining the bonded node set between their surfaces and the interaction properties given to these bonded nodes in the VCCT and CZM (Surface) techniques. A layer of cohesive element was provided between the top and bottom parts of the DCB specimen in the CZM (Element) approach to investigate the crack growth behavior. The XFEM technique is based on arbitrary crack propagation, so the initial crack path and top–bottom parts of the DCB specimen are not required to define in the XFEM technique. The XFEM technique was employed with VCCT and CZM techniques using the enrichment function. The stress-based criteria was used for crack initiation, whereas the energy-based approach was used for crack propagation in DCB laminate. The numerically simulated responses were compared with the published experimental load–displacement responses and agreed well. A parametric study of various fracture parameters (cohesive strength, fracture energy, interfacial stiffness, laminate thickness, and pre-crack length) was conducted to understand their effects on load–displacement responses of the Mode-I interlaminar fracture. The several fracture modeling techniques were compared by considering the element type, shape, total elements, accuracy, run-time, increments, and convergence speed. The surface-based fracture modeling approaches showed a high dependency on mesh size. All the fracture modeling approaches validate the experimental trend; however, the three-dimensional XFEM–CZM technique showed excellent accuracy with moderate mesh dependency and took the highest computer consumption time. Thus, it was found as the most significant interlaminar fracture modeling technique for the prediction of crack behavior to a large extent.

MODELLING OF CRACK DEVELOPMENT PROCESSES IN COMPOSITE ELEMENTS BASED ON VIRTUAL CRACK CLOSURE TECHNIQUE AND COHESIVE ZONE MODEL

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Effect of Multiple Matrix Cracking on Crack Bridging of Fiber Reinforced Engineered Cementitious Composite

Mode-I interlaminar fracture modeling of DCB composite laminate using finite element techniques

PHASE FIELD BASED COHESIVE ZONE FRACTURE APPROACH TO MODEL ANISOTROPIC EFFECT AND INTERFACE FRACTURE IN FIBER REINFORCED POLYMER COMPOSITES

Modeling of Crack Bridging and Failure in Heterogeneous Composite Materials: A Damage-Plastic Multiphase Model

In-Plane fracture of laminated fiber reinforced composites with varying fracture resistance: experimental observations and numerical crack propagation simulations

Micromechanical Progressive Damage Analysis of Inter- and Intra-Layer Failures in Fiber-Reinforced Composite Laminates

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Evaluations on VCCT and CZM methods of delamination propagation simulation for composite specimens

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites

A Damage Model Reflecting the Interaction Between Delamination and Intralaminar Crack for Failure Analysis of FRP Laminates

Assessing Effective Properties of Continuous Carbon Fiber-Reinforced Composites with the Preset Cracks

Discrete Cohesive Zone Model to Simulate Static Fracture in Carbon Fiber Composites

Modeling Progressive Failure and Crack Evolution in a Randomly Distributed Fiber System Via a Coupled Phase-Field Cohesive Model

Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading

Development of Two Intrinsic Cohesive Zone Models for Progressive Interfacial Cracking of Laminated Composites with Matching and Non-Matching Cohesive Elements

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Measurement of Fracture Parameters Based Upon Digital Image Correlation and Virtual Crack Closure Techniques

Finite Element Analyses of Face/Core Interfacial Fracture Toughness of Composite Sandwich with Reinforced Chopped Fibers

A Micromechanical Model for Longitudinal Compressive Failure in Unidirectional Fiber Reinforced Composite