Abstract:Compositely doped oxide La0.7Sr0.3Co0.3Fe0.7O3 (LSCF) was synthesized using solid state reaction and citric acid-nitrate low temperature self-propagating combustion methods. The crystal structure and the particle size micrograph of LSCF powders synthesized by different methods were investigated with XRD and SEM. The experimental results show that the single perovskites phase of LSCF can be synthesized by both methods. The particle size of LSCF by citric acid-nitrate low temperature self-propagating combustion method was the smaller. Two types of cathodes wafers were fabricated with the two kinds of LSCF powders and Ce0.9Gd0.1O1.95 (GDC) at the mass rate of 6:4, respectively. The electrical conductivity of sintered samples was measured by four probe DC method from 100 degrees C-800 degrees C. The cathode with LSCF particle by citric acid-nitrate low temperature self-propagating combustion method has the higher electrical conductivity. The conduction mechanism for the samples is attributable to the adiabatic-hopping of p-type small polaron. In order to investigate the stability, the samples were put into the muffle furnace to heat up in air at 800 degrees C for 800h. To analyze the reason for reduced electrical conductivity, the crystal structure and the particle micrograph of the cathodes before and after exposure were investigated with XRD and SEM. The result shows that both cathodes have good stability, good compatibility with GDC. The sample micrographs do not change too much. The electrical conductivity of the two cathodes reduces a little after exposure.

In Situ Templating Synthesis Of Conic Ba0.5sr0.5co0.8fe0.2o3-Delta Perovskite At Elevated Temperature

In situ templating synthesis of conic Ba 0·5 Sr 0·5 Co 0·8 Fe 0·2 O 3− δ perovskite at elevated temperature

<Emphasis Type="Italic">In situ</Emphasis> templating synthesis of conic Ba<Subscript>0·5</Subscript>Sr<Subscript>0·5</Subscript>Co<Subscript>0·8</Subscript>Fe<Subscript>0·2</Subscript>O<Subscript>3−<Emphasis Type="Italic">δ</Emphasis></Subscript> perovskite at elevated temperature

Understanding Thermochemical Energy Storage Performance of Ba1-Sr CoO3- Perovskite System: A Computational and Experimental Study

A Novel Route to Synthesize Nano-Crystalline Ba0.5sr0.5co0.8fe0.2o3-Delta Perovskite Oxide at High Temperature

Hexagonal Perovskite Ba0.9Sr0.1Co0.8Fe0.1Ir0.1O3-delta as an Efficient Electrocatalyst towards the Oxygen Evolution Reaction

Hexagonal Perovskite Ba0.9Sr0.1Co0.8Fe0.1Ir0.1O3−δ As an Efficient Electrocatalyst Towards the Oxygen Evolution Reaction

Synthesis of Nano-Particle and Highly Porous Conducting Perovskites from Simple in Situ Sol-Gel Derived Carbon Templating Process

Synthesis and Characterization of Ba0.5Sr0.5Co0.8Fe0.2O3−σ

Preparation and properties of BaxSr1-xCoyFe1-yO3-δ cathode material for intermediate temperature solid oxide fuel cells

Composition and shape control of single-crystalline Ba1-xSrxTiO3 (x=0-1) nanocrystals via a solvothermal route

Optimization of BaxSr1−xCo0.9Nb0.1O3−δ Perovskite As Oxygen Semi-Permeable Membranes by Compositional Tailoring

Suppressing the Surface Amorphization of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Perovskite toward Oxygen Catalytic Reactions by Introducing the Compressive Stress

In Situ Tetraethoxysilane‐Templated Porous Ba0.5Sr0.5Co0.8Fe0.2O3−δ Perovskite for the Oxygen Evolution Reaction

Significant impact of nitric acid treatment on the cathode performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ perovskite oxide via combined EDTA-citric complexing process

Synthesis of SmBaCo2O6−δ powder by the combustion process using Co3O4 as precursor

Characterization And Stability Of La0.7sr0.3co0.3fe0.7o3 Perovskite-Type Oxide

Design, Synthesis, Structure and Properties of Ba-Doped Derivatives of SrCo0.95Ru0.05O3−δ Perovskite as Cathode Materials for SOFCs

Barium- and Strontium-Enriched (ba0.5sr0.5)1+xco0.8fe0.2o3−δ Oxides As High-Performance Cathodes for Intermediate-Temperature Solid-Oxide Fuel Cells

Assessment of Ba0.5Sr0.5Co1−yFeyO3−δ (y=0.0–1.0) for Prospective Application As Cathode for IT-SOFCs or Oxygen Permeating Membrane

Low Thermal-Expansion and High Proton Uptake for Protonic Ceramic Fuel Cell Cathode