Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A suspension seat is generally designed to achieve attenuation of low frequency whole-body vibration for a broad range of vehicles. Owing to the strong dependence of its vibration isolation performance on the nature of vibration excitation, an optimal performance could be realized via optimal tuning of suspension for specific classes of vehicles. In this study, a coupled occupant suspension seat model is developed and analyzed to identify optimal design parameters for different classes of vehicles. The multibody dynamic model of the air suspension seat is formulated considering kineto-dynamics of the suspension system and the elastic motion-limiters. The component models, namely, air spring with auxiliary air volume, hydraulic damper, and cushion, are identified from the laboratory-measured static and dynamic characteristics. A two-degree-of-freedom occupant model, is integrated to the suspension seat model to account for contribution due to occupant biodynamics. Model validity is examined using the laboratory-measured responses with a rigid load and a human occupant of similar body weight, and analyzed for different body weights and excitation spectra. The results suggest strong dependency of the suspension resonance frequency on nonlinear behavior of the air spring and the seated body mass. The model is subsequently employed to identify optimal coordinates of the air spring to achieve nearly constant natural frequency for a broad range of body masses. Furthermore, the model is used to identify optimal linkage and suspension design parameters with an objective to minimize the SEAT (Seat Effective Amplitude Transmissibility) for different spectral classes of earth moving machines defined in the ISO-7096 standard, while limiting the suspension travel. It is shown that the optimal coordinates of air spring could yield nearly constant natural frequency for different body weights, while damper could help limit the suspension travel, in addition to notable reductions in SEAT, ranging from 9% to 31% for different spectral classes of vehicles.

Development of a New Seating Platform Based on the 3-RCC Parallel Mechanism

Model-Free Adaptive Control of an Active Half-Vehicle-Seat System Coupled with a Nonlinear Energy Sink Inerter (NESI)

Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension

Multi-dimensional vibration isolating properties of a 3-RPS parallel damping seat

Effect of time-delay feedback control on vehicle seat vibration reduction and suspension performance

Effect of delayed resonator on the vibration reduction performance of vehicle active seat suspension

Time-Delay Vibration Reduction Control of 3-DOF Vehicle Model with Vehicle Seat

Vibration reduction performance of an innovative vehicle seat with a vibration absorber and variable damping cushion

Research on Vibration Reduction Performance of Electromagnetic Active Seat Suspension Based on Sliding Mode Control

Improvement of vibration isolation performance of multi-mode control seat suspension system through road recognition using wavelet-LSTM approach

Investigation of a seat suspension installed with compact variable stiffness and damping rotary magnetorheological dampers

Semi-Active Vibration Control of Seat Suspension Equipped with a Variable Equivalent Inertance-Variable Damping Device

Performance evaluation of a novel semi-active absorption and isolation co-control strategy with magnetorheological seat suspension for commercial vehicle

Coupled occupant-suspension-seat system analysis and vehicle-specific design optimization

Prescribed Performance Control-Based Semi-Active Vibration Controller for Seat Suspension Equipped with an Electromagnetic Damper

Research on a novel displacement-dependent semi-active valve damping control mechanism used in the seat suspension system

Adaptive Robust Active Vibration Control for Vehicle Seat Suspension with Unknown Passenger Mass

A Novel Application of Magnetorheological Seat Suspension with an Improved Tuning Control Strategy

Performance study of semi-active seat suspension added by quasi-zero stiffness structure under various vibratory roller models

Suspension Design and Posture Control for a Novel By-Wire Chassis Based on Integrated Electric Wheel Module

Vibration Performance Optimization of the Semi-Active Suspension with Fuzzy Control Method