Abstract:Fusion welding is extensively used for joining structural assemblies, especially those with complex geometries. However, it often results in heat-affected zones (HAZ) that are, in most cases, softer than other regions around and beyond the weld area. Coupling both experiment and thermodynamic modeling—electron microscopy, x-ray microscopy (XRM), and CALculation of PHAse Diagrams (CALPHAD)—we re-examine the origin of softening in tungsten inert gas (TIG)-welded heat-treatable AA 6061-T651 for a more comprehensive understanding of its (softening) evolution. This study reveals material softening up to at least 38 mm away from the weld center, and partitioned heat-affected zones—HAZ1, HAZ2, HAZ3, and HAZ4—based on peak temperature, associated hardness, and precipitate phases in these zones. Analytical modeling and thermodynamic simulation predict solid solution and further precipitation of coherent GP zones in HAZ1, while coarsening of pre-existing precipitate occurs in HAZ2 (non-coherent/stable β -Mg 2 Si), HAZ3 (both semi-coherent/metastable β ′ and coherent/metastable β ′′) and HAZ4 (coherent/metastable β ′′). These welding-induced transformations—origin of softening—result in non-homogenous hardness in the zones compared to the unaffected base material (120 HV): HAZ1 to HAZ4 are 66-72, 54-64, 64-94, and 95-106 HV, respectively. Under tensile load, the TIG-welded sample fractures at the softest region—HAZ2. Additionally, XRM analysis confirms the presence of porosity in the welded area and its closure during plastic deformation, so that the severity of softening has a greater influence on localized fracture than the presence of porosity in the weld area. This work shows that new solid-state welding technologies that minimize nanostructural changes in base materials, especially precipitation-hardened alloys, should be sought.

Modelling of Heat Affected Zone Softening in Laser Welding of M1500

Modeling of Temperature Distribution in Laser Welding of Lapped Martensitic Steel M1500 and Softening Estimation

Effect of Welding Speed on Softening Behavior of Heat Affect Zone for High Strength Steel Laser Welding

Modeling of Temperature Field and Pool Formation During Linear Laser Welding of DP1000 Steel

Stress evolution mechanism during laser welding of ultra-high-strength steel: considering the effects of temperature sensitivity, strain hardening and annealing

Studies of the Characteristics and Size Effects of Softened Zone of Laser Welded 20mntib Joint

Effect of welding speed on microstructure, hardness and tensile properties in laser welding of advanced high strength steel

Fiber Laser Welding of 1700-MPa, Ultrahigh-Strength Steel

Softening Phenomenon of Heat-Affected Zone in Laser Welding of 6082 Al Alloys with Filler Wire

Effect Mechanism of Softening Zone Constraint on Tensile Failure of High-Strength Steel Laser-Welded Joints

The Role of HAZ Softening on Cross-Tension Mechanical Performance of Martensitic Advanced High Strength Steel Resistance Spot Welds

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

X-ray Microscopic and Thermodynamic Model Assessments of Softening in TIG-Welded AA 6061-T651

A thermal–metallurgical model of laser beam welding simulation for carbon steels

Fusion Zone Characterization of Resistance Spot Welded Maraging Steels Via Selective Laser Melting

Numerical Simulation of Temperature Evolution, Solid Phase Transformation, and Residual Stress Distribution during Multi-Pass Welding Process of EH36 Marine Steel

Effect of Heat Input on Microstructure and Mechanical Properties of Laser Welded Medium Mn Steel Joints

Coupled simulation of thermal-metallurgical-mechanical behavior in laser keyhole welding of AH36 steel

Resistance Spot Welding of Additively Manufactured Maraging Steels Part II: Failure Behavior

Local laser softening of high-strength steel with an adapted intensity

Study on Δ-Ferrite Evolution and Properties of Laser Fusion Zone During Post-Weld Heat Treatment on Al-Si Coated Press-Hardened Steel