Abstract:Due to the unfavorable blast resistance of reinforced concrete (RC) slabs, particularly with the frequent occurrence of penetration and spalling damage, engineered cementitious composite (ECC) provided a promising alternative for enhanced blast resistance through its direct application as a building material or by reinforcing existing RC slabs due to its excellent tensile ductility and toughness. In the present study, the blast resistance of the RC slab, the ECC slab, and the composite slab (RC slab reinforced by ECC layer) was investigated and compared through experimental and numerical approaches. Firstly, the material properties of the ECC were acquired through the quasi-static compressive test, as well as quasi-static and dynamic tensile tests, which felicitated the parameter calibration in the K&C model for ECC. Then the numerical models of the RC slab, the ECC slab, and the RC/ECC composite slab were established and validated with the blast test results. The test and numerical results showed that the ECC and composite slabs exhibited superior anti-blast performance in terms of failure mode, damage extent, and load mitigation compared to the RC slab. Owing to the remarkable ductility and toughness, the ECC and composite slabs could greatly reduce the possibility and severity of penetration and spalling damage. Furthermore, five significant parameters impacting the blast resistance of ECC and composite slabs were summarized through dimensional analysis including the tensile strength of ECC σt, the total explosive energy Q, the standoff distance R, the slab thickness H, and the slab span L. Then a dimensionless number was proposed to determine the failure mode and predict the residual deflection at the center of the ECC and composite slabs. The results could serve as a reference for the design of ECC and composite slabs to resist blast loading in the field of structural protection.

Numerical Analysis On Blast Resistant Capability Of Reinforced Concrete Slab

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Numerical Investigation of Blasting-Induced Damage in Concrete Slabs

Numerical Study and Theoretical Analysis on Blast Resistance of Fabricated Concrete Slab

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Experimental and Numerical Study on the Dynamic Response of RC Slabs under Blast Loading

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Blast resistant capacity of reinforced concrete slab based on experiment and equivalent single degree of freedom method

Blast Resistance of Reinforced Concrete Slabs Based on Residual Load-Bearing Capacity

Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions

Analysis for Blast Resistance and Damage Mode of Reinforced Concrete Slab Subjected to Explosive Load

Damage Mechanism and Mode of Square Reinforced Concrete Slab Subjected to Blast Loading

Numerical analysis of reinforced concrete buildings subjected to blast load

Numerical Study on Dynamic Behaviors of NRC Slabs in Containment Dome Subjected to Close-in Blast Loading

Blast Resistance of Small-Scale RCS in Experimental Test and Numerical Analysis

Dynamic Response of Reinforced Concrete Slab Subjected to Internal Blast Loading

Investigation on Anti-Explosion Performance of Reinforced Concrete Slab with Composite Protective Aluminum Foam

Blast Resistance of ECC and Composite Slabs Subjected to Near-Field Explosion

The Effect of Concrete Containing Recycled Concrete Aggregate and Crushed Clay Bricks on Slab under Dynamic Loading

Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion

Experimental and Numerical Investigation of Steel-Concrete (SC) Slabs under Contact Blast Loading