Study Of Adsorption Ice-Maker Driven By The Exhausted Heat Of Diesel Engine

Sg Wang,Rz Wang,Jy Wu,Lw Wang

2004-01-01

Abstract:A two-adsorber activated carbon-methanol adsorption ice-maker prototype for fishing vessels, which is operated with a heat and mass recovery cycle, is developed and tested. A new consolidated adsorbent block made of activated carbon mixed with a binder with good heat transfer and enhanced mass transfer properties has been developed and implemented in a novel adsorber. The design is focused on the adsorber consisting of copper finned tubes and carbon blocks. Vapor flow channels are reasonably distributed in the adsorbers. Experimental tests have been performed at ice making operating conditions with a direct production of flake ice. This paper presents the experimental results of such an ice-maker operating with a cycle time of 40 minutes including heat recovery time of 1.5 min and mass recovery time of 1 min. Good performances have been achieved due to enhanced heat and mass transfer. The COP (coefficient of performance) over the whole cycle reaches 0.18 whereas the SCP (specific cooling power) achieved is 27 W/kg carbon to produce 18 - 20 kg/h of flake ice at mean temperature of - 7 degrees C.