Abstract:Image guided radiation therapy (IGRT) is a technique for increasing the precision of radiation delivery that couples diagnostic imaging with the treatment procedure. In some radiation oncology facilities, computed tomography (CT) scanners on rails are being installed in the treatment room with linear accelerators (LINAC’s) so that patients can be imaged and then treated on the same table without changing the patient setup. This allows clinicians to “see-inside” their patients on a regular basis during the course of therapy and correct for any changes that may occur. Current CT-IGRT procedures rely on the placement of external radiopaque markers on the patient’s skin. These markers are needed to locate the setup isocenter in the CT scan and are used as a reference from which any shifts are made. Unfortunately, these markers can suffer from several sources of error including uncertainty in placement, patient motion, laser inaccuracies, and variation in image registration. We have developed a system that does not require fiducial markers and thus simplifies the IGRT process while increasing accuracy. A system was designed to map CT images to their actual location and orientation in the treatment room. Custom-milled “anchor points” were mounted to three walls and the ceiling. These anchor points allowed precise radial distances to be measured in any direction. Custom software was then created that could determine the x, y, and z coordinate of any point in the room based on it’s distance from each of these anchor points. A coordinate system fixed to the room was thus established. Next, phantom measurements were used to determine a matrix transform that could convert any point in the CT volume into its associated room coordinate. Because a mathematical relationship was established between CT pixels and their exact location in the treatment room, fiducial markers were no longer needed to calibrate the system on a per patient basis. A custom IGRT phantom was developed to test the accuracy of our system. This calibration method has simplified our daily CT-IGRT workflow. Patients are now placed on the treatment table the same as for conventional radiation therapy. Before treating, the table is rotated by 180 degrees to the imaging position and a CT scan is made. The images are sent automatically via DICOM to custom software where they are compared with the original treatment plan. There is no need at this point to register the images as before with external markers. The IGRT team simply selects a new isocenter and the software automatically calculates the needed table shift and rotation based on the calibration matrix. Next, the table is placed into treatment position using these shifts and the treatment proceeds as normal. Our research indicates that isocenters can be reliably located to better than 0.5 mm in the image plane and 0.8 mm in the scan direction. CT based IGRT can be a cumbersome process if the images are registered during each procedure using fiducial markers. In contrast, the anchor point system and custom software allow for rapid, reproducible, and accurate patient setup. Our experience has shown this method to be easier and more reliable than the use of fiducial markers

Accuracy and Efficiency of an Infrared Based Positioning and Tracking System for Image-Guided Intervention

Near infrared laser computed tomography test–system design and application

Design of the Image-Guided Biopsy Marking System for Gastroscopy

Positional Accuracy and Transmitter Orientation of the 3D Electromagnetic Tracking System

Investigating the accuracy of machine vision and augmented reality in percutaneous computed tomography-guided interventions: A phantom study

Development of Automated Real-time Tracking and Localizing System in Radiotherapy

Innovative integration of augmented reality and optical surface imaging: A coarse‐to‐precise system for radiotherapy positioning

Radiotherapy Treatment Based on Binocular Location: Real-Time Monitoring System of Patient Setup Errors

Analysis of precision in tumor tracking based on optical positioning system during radiotherapy.

Study on Navigation System for US-guided Intervention

A Non-Invasive Navigation System for Retargeting Gastroscopic Lesions

A New Method For Image Guided Radiation Therapy Using Computed Tomography

Surgical Tracking, Registration, and Navigation Characterization for Image-guided Renal Interventions

Computed tomography and structured light imaging guided orthopedic navigation puncture system: effective reduction of intraoperative image drift and mismatch

Improving puncture accuracy in percutaneous CT-guided needle insertion with wireless inertial measurement unit: a phantom study

A Real-Time Tracking and Visualization System for Robot-Assisted Template Location Method Applied to Lung Cancer Brachytherapy

Development and Experimental Testing of a Robot-Assisted Positioning System for Brachytherapy

Phantom and Animal Study of a Robot-Assisted, CT-Guided Targeting System using Image-Only Navigation for Stereotactic Needle Insertion without Positional Sensors

3D Ultrasound System for US-guided Intervention Therapy

An Infrared Guided Patient Setup Method for Radiotherapy by Using a Modified Spirit Level

[A Positioning Error Measurement Method in Radiotherapy Based on 3D Visualization].