Abstract:Four different types of structured nitrogen-doped carbon nanotube membranes (C50, NC25, NC50, N25C25) were used as metal-free catalysts for phenol degradation. Firstly, nitrogen-doped carbon nanotubes were prepared on paper-like sintered stainless steel fibers (PSSF) by chemical vapor deposition using melamine and acetylene as dual precursors, then the nitric acid was used to remove amorphous carbon and catalyst particles in the tubes. Subsequently, TEM, XPS, N2 adsorption and desorption and other characterization techniques were used to investigate the structure and morphology of the catalysts. Characterization results showed that the use of dual precursor could well adjust the nitrogen content in carbon nanotubes, and nitrogen doping could change the hollow structure of carbon nanotubes into rough bamboo-like and corrugated structure. Meanwhile, acid treatment significantly increased the specific surface area, among which the value of HN25C25 reached 38.15 m2/g. Pristine and acid-treated catalysts were then used to activate peroxymonosulfonate (PMS) in a structured fixed bed reactor. NC25 and N25C25 were able to mineralize 46% and 17.5% of phenol at 1 h, but the TOC conversion rate only maintained at about 10% in the subsequent reaction time. After acid treatment, HNC25 and HN25C25 were able to mineralize up to 76% and 84% of phenol, and the TOC conversion rate maintained at about 70% within 7 h. the high leaching of Fe in the acid-treated catalysts could be attributed to the formation of small carboxylic acids and the destruction of the PSSF support during the reaction. At last, radical inhibition experiments and ESR spectra showed that sulfate radicals and hydroxyl radicals were the main active species in the reaction. The increase in the proportion of active nitrogen species and the improvement in contact efficiency could explain the higher mineralization efficiency of phenol catalyst after acid treatment.

Preparation Of Catalytic Activated Carbon Fiber And Its Catalytic Oxidation Performance To 4-Nitrophenol

Catalytic Degradation of 4-Nitrophenol by Activated Carbon Fiber Supported Iron Tetrasulfophthalocyanine

Oxidative Removal of 4-Nitrophenol Using Activated Carbon Fiber and Hydrogen Peroxide to Enhance Reactivity of Metallophthalocyanine

Atomically dispersed ternary FeCoNb active sites anchored on N-doped honeycomb-like mesoporous carbon for highly catalytic degradation of 4-nitrophenol

Catalytic Oxidation of Phenols by Cobalt Phthalocyanine Supported Activated Carbon Fibers

Ozonation of P-Nitrophenol Adsorbed on Activated Carbon Fiber (acf) and the Change of Textural and Chemical Characteristics of Acf

P-Nitrophenol Abatement by the Combination of Electrocatalysis and Activated Carbon

Heterogeneous Fenton-like catalysis of Fe-MOF derived magnetic carbon nanocomposites for degradation of 4-nitrophenol

Effect of Nitrogen Doping on the Catalytic Activity of Activated Carbon and Distribution of Oxidation Products in Catalytic Wet Oxidation of Phenol

Preparation of Novel Catalyst-Free Fe3C Nanocrystals Encapsulated NCNT Structured Catalyst for Continuous Catalytic Wet Peroxide Oxidation of Phenol.

Role of Surface Chemistry in Modified ACF (activated Carbon Fiber)-Catalyzed Peroxymonosulfate Oxidation

Preparation of Structured N-CNTs/PSSF Composite Catalyst to Activate Peroxymonosulfate for Phenol Degradation

Cu-immobilized cellulose filter paper: effect of polymer structure and functionality on catalytic activity and reusability for 4-nitrophenol reduction

Highly efficient peroxymonosulfate activation on Fe-N-C catalyst via the collaboration of low-coordinated Fe-N structure and Fe nanoparticles for enhanced organic pollutant degradation

FeCx-coated biochar nanosheets as efficient bifunctional catalyst for electrochemical detection and reduction of 4-nitrophenol

Fabrication of carboxymethylated cellulose fibers supporting Ag NPs@MOF-199s nanocatalysts for catalytic reduction of 4-nitrophenol: SYNTHESIS OF CELLULOSE-BASED NANOCATALYST FOR 4-NITROPHENOL REDUCTION

Modified cellulose nanofibril aerogel: Tunable catalyst support for treatment of 4-Nitrophenol from wastewater

Adsorption and Catalytic Degradation by CoFe2O4 Coated on Metal–organic Framework for the Removal of 4-Nitrophenol and 2,4-Dichlorophenol

Adsorption of P-Nitrophenol from Aqueous Solutions Onto Activated Carbon Fiber

Fe-nitrogen-doped carbon with dual active sites for efficient degradation of aromatic pollutants via peroxymonosulfate activation

Preparation of Pitch-based Activated Carbon Fibers and Their Catalytic Oxidation Performance for NO