Abstract:Hemolysis is one of the most important issues of blood contacting artificial organs. Computational fluid dynamics, in conjunction with hemolysis models, has been widely used to predict the flow field and hemolysis during the development phase of these devices. It is widely accepted that hemolysis is related to flow field parameters, such as stress and energy dissipation. It is known that inlet boundary conditions such as turbulent intensity have important effects on flow fields. Nonetheless, the influence of inlet turbulent intensity on hemolysis is not yet clear. This study investigates the influence of turbulent intensity on the prediction of flow field and hemolysis in the FDA benchmark nozzle model. Three configurations are investigated: first is the original nozzle model (with a gradual contraction, throat, and sudden expansion); the second is composed only of the throat and sudden expansion; the third one is similar with the second, but with a shorter throat. Four turbulent intensities are considered, ranging from 1% to 20%. For the first configuration, the influence of turbulent intensity on both flow field and hemolysis is very small and limited prior to the gradual contraction, while for the other two configurations, the influence is considerable. The jet breaks down sooner with increased turbulent intensity. Both turbulence dissipation rate and Reynolds stress increase in the throat with increased turbulent intensity, but decrease after the jet breaks down. The influence of turbulent intensity is more considerable for the configuration with a shorter inlet. The influence of turbulent intensity on the prediction of hemolysis is up to 38.5%. This study shows that turbulent intensity can have considerable influence on the prediction of flow field and hemolysis in blood-contacting devices, thus should be taken in account when conducting blood compatibility design.

Effects Of Inlet And Outlet On Mass Transfer Of Hemodialyzers

A novel theoretical model for mass transfer of hollow fiber hemodialyzers

Double Porous Media Model for Mass Transfer of Hemodialyzers

EFFECTS OF INLET ARRANGEMENTS ON LIQUID-LIQUID FLOW PATTERNS IN CROSS-JUNCTION SQUARE MICROCHANNELS

Simulation and Experimental Study on the Effect of Channeling Flows on the Transport of Toxins in Hemodialyzers

Effect of distribution tabs on mass transfer of artificial kidney

Effects of Inlet and Outlet Conditions on Fluid-Wall Interaction Models in Hemodynamics

The Donnan equilibrium is still valid in high-volume HDF

Simulation Of Velocity And Concentration Fields In Artificial Kidneys

Three-dimensional simulation of mass transfer in artificial kidneys.

Analysis of Mass-transfer Model in Dialysis Hollow Fiber Membrane

Upscaling solute concentration transport equations of countercurrent dialyzer systems

Two-Dimensional Theoretical Analysis and Experimental Study of Mass Transfer in a Hollow-Fiber Dialysis Module Coupled with Ultrafiltration Operations

Influence of Inlet Boundary Conditions on the Prediction of Flow Field and Hemolysis in Blood Pumps Using Large-Eddy Simulation

EFFECT OF DISTRIBUTION TABS ON MASS TRANSFER AT THE DIALYSATE INLET AND OUTLET OF ARTIFICIAL KIDNEY

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Effects of Surrounding Un Bound Fluid Field on Average Mass Transfer Coefficient over Surface of a Single Hollow Fiber

The Effects Of Recirculation Flows On Mass Transfer From The Arterial Wall To Flowing Blood

The Effects of Recirculation Flows on Mass Transfer from the Arterial Wall to Flowing Blood.

Effect of turbulent inlet conditions on the prediction of flow field and hemolysis in the FDA ideal medical device

Effects of Distribution Channel Dimensions on Flow Distribution and Pressure Drop in a Plate‐Fin Heat Exchanger