Abstract:Hemolysis is one of the most important issues of blood contacting artificial organs. Computational fluid dynamics, in conjunction with hemolysis models, has been widely used to predict the flow field and hemolysis during the development phase of these devices. It is widely accepted that hemolysis is related to flow field parameters, such as stress and energy dissipation. It is known that inlet boundary conditions such as turbulent intensity have important effects on flow fields. Nonetheless, the influence of inlet turbulent intensity on hemolysis is not yet clear. This study investigates the influence of turbulent intensity on the prediction of flow field and hemolysis in the FDA benchmark nozzle model. Three configurations are investigated: first is the original nozzle model (with a gradual contraction, throat, and sudden expansion); the second is composed only of the throat and sudden expansion; the third one is similar with the second, but with a shorter throat. Four turbulent intensities are considered, ranging from 1% to 20%. For the first configuration, the influence of turbulent intensity on both flow field and hemolysis is very small and limited prior to the gradual contraction, while for the other two configurations, the influence is considerable. The jet breaks down sooner with increased turbulent intensity. Both turbulence dissipation rate and Reynolds stress increase in the throat with increased turbulent intensity, but decrease after the jet breaks down. The influence of turbulent intensity is more considerable for the configuration with a shorter inlet. The influence of turbulent intensity on the prediction of hemolysis is up to 38.5%. This study shows that turbulent intensity can have considerable influence on the prediction of flow field and hemolysis in blood-contacting devices, thus should be taken in account when conducting blood compatibility design.

Simulation and Experimental Study on the Effect of Channeling Flows on the Transport of Toxins in Hemodialyzers

A novel theoretical model for mass transfer of hollow fiber hemodialyzers

Three-dimensional simulation of mass transfer in artificial kidneys.

A Theoretical Ultrafiltration Model for Albumin-Bound Toxin Dialysis

Effects Of Inlet And Outlet On Mass Transfer Of Hemodialyzers

Two-Dimensional Theoretical Analysis and Experimental Study of Mass Transfer in a Hollow-Fiber Dialysis Module Coupled with Ultrafiltration Operations

Simulation of Multiphase Flows in Microscale Hemodialysis

An Experimental Investigation of Hollow Fiber Flow in Dialyzer

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Simulation Of Velocity And Concentration Fields In Artificial Kidneys

Double Porous Media Model for Mass Transfer of Hemodialyzers

Investigating the Dialysis Treatment Using Hollow Fiber Membrane: A New Approach by CFD

A steady-state mass transfer model of removing CPAs from cryopreserved blood with hollow fiber modules.

Numerical Simulation of Mass Transfer in Hollow Fiber Membrane Module for Membrane-Based Artificial Organs

Computational analysis and experimental validation of dialysis flow rate in central venous catheters

Upscaling solute concentration transport equations of countercurrent dialyzer systems

A Simulation on How Pattern Inside Porous Plate Channels

Effect of distribution tabs on mass transfer of artificial kidney

Effect of turbulent inlet conditions on the prediction of flow field and hemolysis in the FDA ideal medical device

Molecular Dynamics Simulations of Ion Transport through Protein Nanochannels in Peritoneal Dialysis

Numerical Simulation and Experimental Validation of Bound Solute Dialysis in Artificial Liver Support Systems