Abstract:As an efficient heat transfer enhancement device, a helical tube is widely used in various industrial applications and its composite heat transfer enhancement technique has also elicited widespread attention. This study proposes an innovative technique that combines sinusoidal pulsating flow with annular corrugation and then applies it to a helical tube. Numerical simulation is performed to investigate the effects of pulsation flow parameters on the structure of the flow field and the efficiency of heat transfer. Then, the mechanism of heat transfer improvement is revealed. Results show that the collaborative effects of pulsating flow and annular corrugation can enhance the turbulent intensity of the mainstream fluid. In addition, the structure of the secondary flow field is changed and synergy between the velocity field and the temperature field is enhanced further. Within the studied range, the average Nusselt number ( Nu ) of sinusoidal pulsating flow in a helical tube with an annular corrugated wall structure is enhanced by 16.05 % and 10.52 % compared with that of steady flow in a smooth helical tube and an annular corrugated helical tube, respectively. With an increase in the dimensionless pulsation frequency ( Wo ), Nu initially increases and then decreases, while the friction resistance coefficient ( f D ) gradually increases. As the dimensionless pulsation amplitude ( A 0 ) increases, Nu and f D gradually increase. The comprehensive thermal performance evaluation index exhibits a maximum observed value of 1.241 when Dean number = 7709, Wo = 25, and A 0 = 0.25 within the studied range.

Experimental Study Of Convective Heat Transfer In Pulsating Air Flow Inside Circular Pipe

Observation of Heat Transfer in Oscillating Flow Within A Circular Channel

Experimental investigation on heat transfer performance of closed-loop pulsating heat pipe with large inner diameter

Design and Experimental Study on Vane-type Pulsating Flow Generator

Experimental Research on Heat Transfer Performance of 3 mm Closed Pulsating Heat Pipe

Numerical Simulation of Turbulent Pulsating Flow and Heat Transfer in Tubes

Oscillatory Heat Transfer in a Pipe Subjected to a Laminar Reciprocating Flow

Experimental Study on the Thermo-Hydrodynamic Characteristics of a Nitrogen Pulsating Heat Pipe

Experimental investigation of flow visualization and thermal performance of flat-plate single-loop pulsating heat pipes

Numerical study and mechanism analysis of heat transfer in a helical tube enhanced by sinusoidal pulsating flow combined with an annular corrugated structure

Experimental Investigation of the Visualization of Pulsating Heat-pipe Operation as well as Heat Transfer and Flow Characteristics

Transient Convective Heat Transfer in a Helical Coiled Tube with Pulsatile Fully Developed Turbulent Flow

Experimental Study on Heat Transfer Characteristics of Annular Flow Between Vertical Concentric Pipe

Numerical investigation and mechanism analysis of heat transfer enhancement in a helical tube by square wave pulsating flow

Numerical Study Of Flow And Heat Transfer In Rectangular Channel With Periodic Longitudinal Vortex Generators Under Pulsating Flow

Numerical Study of Laminar Pulsating Flow in a Channel

Numerical Analysis of the Enhanced Convection Heat Transfer in an Annular Finned Tube with Laminar Pulsating Flow

An analytical study of pulsating laminar heat convection in a circular tube with constant heat flux

Numerical Simulation of Laminar Pulsating Flow in Tubes

Experimental study on forced convective flow and heat transfer in a concentric annular tube