Grouting Sleeve Fullness Detection Method Based on Microwave Radio Frequency S Parameter

Xiaoqiu Zheng,Jiamin Qi,Wenxuan Shi,Chao Wang,Bin Yuan

DOI: https://doi.org/10.1109/piers-fall48861.2019.9021824

2019-01-01

Abstract:With the development of urban construction, the use of fabricated structures is becoming more and more important. For the prefabricated concrete structures, the quality of the steel sleeve grouting connection is critical. The accurate detection of the thickness, moisture content, porosity and compaction of the part has become the development direction of the detection technology. However, existing detection methods such as ultrasonic flaw detection, infrared defect detection, and shock echo method cannot detect the internal fullness problem very well. In this paper, a method for detecting the fullness of grouting sleeve based on microwave radio frequency S parameters is proposed. Firstly, the application of the dielectric properties model of common media on the mainstream high-strength non-shrinkage grout in the market was studied. The grouting sleeve is then considered as a wave-guide model, and the different grouts filled can be regarded as media with different dielectric constants. In the simulation software, by changing the fullness of the grouting sleeve and the transmission frequency, the S-parameter simulation analysis of the different full-width grouting sleeves at different emission frequencies is carried out, and the corresponding parameter model is established. In the actual detection process, the actual measurement results and the simulation parameter model can be compared to find the most relevant parameter model, and the internal fullness of the grouting sleeve is obtained, which provides a valuable reference for the actual engineering inspection.