Abstract:The traditional methods for testing the sleeve grouting fullness of prefabricated structures generally face the technical challenges such as high detection cost and inability to detect in real-time. In order to solve these technical challenges, the detection method and instrument based on the piezoelectric testing principle were developed. Through the electrical properties tests of grouting materials and grouting-leakage cycle tests of transparent sleeves, the effectiveness of the piezoelectric method for testing grout leakage defects was analyzed. The research results indicate that measuring the voltage changes before and after the piezoelectric sensor is wrapped in the grouting slurry can effectively evaluate the sleeve grouting fullness. The voltage measured by the piezoelectric sensor is significantly reduced after the sensor is wrapped in the grouting material (full grouting). Then the voltage increases after grouting leakage (insufficient grouting), and decreases again after supplementary grouting (full grouting). Moreover, whether the piezoelectric sensor is placed horizontally or vertically, the voltage shows obvious changes, indicating that the piezoelectric method is less affected by the sensor laying mode. Considering that the vertical embedding method is more stable for piezoelectric data, it is recommended to use the vertical laying mode in engineering projects. Furthermore, through the prefabricated model tests, the threshold for judging grouting fullness using piezoelectric method was determined. The test results show that the threshold for determining the grouting fullness using piezoelectric method can be set to 0.40. That is to say, when the voltage value is less than 0.40, it can be determined as complete grouting, otherwise it can be determined as insufficient grouting. The case studies results indicate that the piezoelectric method meets the quality control requirements during the grouting process of prefabricated structural sleeves. The research results provide a new approach and practical reference for solving the quality detection problem of sleeve grouting.

Feasibility Study on Grouting Compactness Detection in Sleeves Using Piezoelectric Transducers

The Feasibility Study of Quantitative Flaw Detection of Grouted Sleeve Connection by Ultrasonics

Research on the Sleeve Grouting Fullness Testing of Prefabricated Structures Based on Piezoelectric Method

Grouting Sleeve Fullness Detection Method Based on Microwave Radio Frequency S Parameter

Detection of sleeve grouting connection defects in fabricated structural joints based on ultrasonic guided waves

Defect detection of grouting sleeve connection with energy ratio change in frequency domain

Debonding Detection in Grouted Sleeves Using Axisymmetric Longitudinal Guided Waves

Self-monitoring of Stresses in Grouted Sleeves Using Smart Grout

Ultrasonic Detection Method For Grouted Defects In Grouted Splice Sleeve Connector Based On Wavelet Pack Energy

Characterization of Damage Progress in the Defective Grouted Sleeve Connection Using Combined Acoustic Emission and Ultrasonics

Nondestructive testing of strength of sleeve grouting material in prefabricated structure based on surface hardness method

A Feasibility Study on EMI Techniques and Disc-Shaped PZT Sensors for Strength Monitoring of Cement-Stabilized Loess

Numerical study on the mechanism of active interfacial debonding detection for rectangular CFSTs based on wavelet packet analysis with piezoceramics

Identification of Static Loading Conditions Using Piezoelectric Sensor Arrays

Experimental Study on the Detection of the Existence and Location of Mimicked and Unexpected Interface Debonding Defects in an Existing Rectangular CFST Column with PZT Materials

Detection of the debonding defect of concrete-filled steel tubes with piezoceramics

Actuating and Sensing Mechanism of Embedded Piezoelectric Transducers in Concrete

Detection of Sleeve Grouting Defects Based on Cascaded Two-port Networks Method

Crack Monitoring in Concrete Structures Based on Piezoelectric Impedance Technique

Real-Time Monitoring of Bond Slip between GFRP Bar and Concrete Structure Using Piezoceramic Transducer-Enabled Active Sensing

Multi-Physics Mesoscale Substructure Analysis on Stress Wave Measurement within CFST-PZT Coupling Models for Interface Debonding Detection