Abstract:Tunable diode laser absorption spectroscopy (TDLAS) is often used to detect CO2 concentrations in many fields. But because of the variation of ambient temperature, the measured the line strength and line-shape are affected and may lead to the monitoring errors. Therefore, in order to overcome the influence of temperature change on the concentration measurement, we used the DFB laser with the center wavelength of 1 580 nm and the direct absorption method was used to measure the high concentration of carbon dioxide gas in the flue of the power plant under the condition of room temperature (298 K) and variable temperature (298 similar to 338 K, interval 10 K). The results showed that the maximum relative error of the concentration measurement was -5.26%, the minimum relative error was 1.25% and the relative error mean square was 3.39% which indicated that TDLAS measurement system had good measurement precision and stability at room temperature. But the concentration measurement in the temperature measurement error, the maximum of relative error was more than 25%. Then, the influence of temperature change on the measurement of the concentration was solved to meet the needs of industrial measurement and on the basis of temperature change measurement, the least squares method was used to fit the correction relation between the concentration of the measurement system and the gas absorption at different temperatures. After the correction, the relative error of the CO2 concentration measurement was reduced to below 5%, and the relative error mean square value fell below 3.5%. The correction results showed that the proposed method can effectively suppress the influence of temperature change on the concentration measurement and improve the measurement accuracy and stability of the system in the variable temperature environment, which provides theoretical support and technical support for the TDLAS system field application.

Temperature Compensation For Concentration Of No2 Based On Doas

Temperature Compensation to Concentration of Polluted Gases in In-situ Measurement with DOAS Method

Compensation Method of NH3 Interference in NO Concentration Measurement in Flue Gas Based on DOAS

Simultaneous Measurement of SO 2 and NO 2 Concentration Using an Optical Fiber-Based LP-DOAS System

Selection Of Wavelength Bands And Nonlinearity Effects For Flue Gas Monitoring

Temperature Compensation Algorithm of Air Quality Monitoring Equipment Based on TDLAS

[Research on In-Situ Monitoring of SO2 Concentration in the Flue Gases with DOAS Method Based on Algorithm Fusion].

Gas Temperature Measurement Using Differential Optical Absorption Spectroscopy (DOAS).

Differential Optical Absorption Spectroscopy Improved for NO Concentration Measurement in Flue Gas

Using Fourier Transform to Calculate Gas Concentration in Doas

Effect of Temperature on Inversion Concentration of NO2 Differential Absorption Lidar and Optimized Algorithm

Study on Temperature Correction Method of CO2 Measurement by TDLAS

Experimental Study on In-Situ Concentration Monitoring of Flue Gas from the Fixed Pollution Source Based on Doas

Study on Measurement Lower Limit of DOAS System Based on Kalman Filter

Measurement of Nitrous Acid and Retrieval of Aerosol Parameters with Differential Optical Absorption Spectroscopy

Study of Concentration Retrieving Method in Differential Optical Absorption Spectroscopy for Measuring Air Pollutants

Experimental study on in-situ measurement of flue gas concentration based on DOAS

A Detection Method for Low Concentrations of SO2 and NO

Study of Retrieving Formaldehyde with Differential Optical Absorption Spectroscopy

Study on the measurement of Air SO2 based on Long path differential optical absorption spectroscopy

TDLAS Monitoring of Carbon Dioxide with Temperature Compensation in Power Plant Exhausts