A DFT-Compatible In-Situ Timing Error Detection and Correction Structure Featuring Low Area and Test Overhead
Hao Zhang,Weifeng He,Yanan Sun,Mingoo Seok
DOI: https://doi.org/10.1109/tcad.2022.3187311
IF: 2.9
2022-01-01
IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Abstract:In-situ timing error detection and correction (EDAC) structure is widely adopted in timing-error resilient circuits to reduce the conservative timing guardband induced by process, voltage, and temperature (PVT) variations. However, it introduces the latch-based datapath as well as extra detection and propagation logic, therefore challenges the design-for-testability (DFT) implementation. In this article, we propose a novel DFT-compatible EDAC structure with significant signal control simplification and test-pattern complexity reduction, featuring low area and test overhead. This structure leverages a new scannable EDAC cell (SEDC) which can be configured for timing EDAC in normal mode, or for shift operations as a flip-flop in scan mode. Specifically, the proposed detection logic can be controlled succinctly in scan shift operations and then observed via the global error propagation logic with simple control signal configurations during the test. Therefore, the sophisticated test pattern generation and critical path sensitization are removed. Based on the structure, a shift-based test method is presented to cover the EDAC structure with a low test pattern complexity and test time overheads. As compared with previous works, the proposed SEDC saves 30.5% area, 16.6% power, and 20.3% delay. Besides, our test method cooperating with the proposed EDAC structure reduces $149\times $ and $23\times $ static and at-speed test patterns, respectively, together with $232\times $ static test cycles, and up to $25\times $ at-speed test cycles on average, which proves the effectiveness for DFT.