Abstract:The deformation monitoring of subway tunnel is of extraordinary necessity. Therefore, a method for deformation monitoring based on terrestrial point clouds is proposed in this paper. First, the traditional adjacent stations registration is replaced by section-controlled registration, so that the common control points can be used by each station and thus the error accumulation avoided within a section. Afterwards, the central axis of the subway tunnel is determined through RANSAC (Random Sample Consensus) algorithm and curve fitting. Although with very high resolution, laser points are still discrete and thus the vertical section is computed via the quadric fitting of the vicinity of interest, instead of the fitting of the whole model of a subway tunnel, which is determined by the intersection line rotated about the central axis of tunnel within a vertical plane. The extraction of the vertical section is then optimized using RANSAC for the purpose of filtering out noises. Based on the extracted vertical sections, the volume of tunnel deformation is estimated by the comparison between vertical sections extracted at the same position from different epochs of point clouds. Furthermore, the continuously extracted vertical sections are deployed to evaluate the convergent tendency of the tunnel. The proposed algorithms are verified using real datasets in terms of accuracy and computation efficiency. The experimental result of fitting accuracy analysis shows the maximum deviation between interpolated point and real point is 1.5mm, and the minimum one is 0.1mm; the convergent tendency of the tunnel was detected by the comparison of adjacent fitting radius. The maximum error is 6mm, while the minimum one is 1mm. The computation cost of vertical section abstraction is within 3 seconds/section, which proves high efficiency..

Three-Dimension Safety Monitoring For Beijing Subway Tunnel

Safety Monitoring Information System of Urban Subway

Long-Term Monitoring and Safety Evaluation of A Metro Station During Deep Excavation

Visual Monitoring Technology of the Tunnel 3D Laser Scanning and Engineering Applications

Deformation monitoring of noncircular tunnels based on 3D laser scanning

3D reconstruction and automatic leakage defect quantification of metro tunnel based on SfM-Deep learning method

Technology and Application of 3D Tunnel Information Monitoring

Shield Subway Tunnel Deformation Detection Based on Mobile Laser Scanning

A NEW APPROACH FOR SUBWAY TUNNEL DEFORMATION MONITORING: HIGH-RESOLUTION TERRESTRIAL LASER SCANNING

Research on Tunnel Construction Monitoring Method Based on 3D Laser Scanning Technology

Full-Section Deformation Monitoring of High-Altitude Fault Tunnels Based on Three-Dimensional Laser Scanning Technology

Dynamic Inspection Technology of Tunnel Deformation Based on Onboard LIDAR

Research and Monitoring of Metro Tunnel Deformation Based on Internet of Things

Research on convergence analysis method of metro tunnel section--Based on mobile 3D laser scanning technology

Method for Tunnel Displacements Calculation Based on Mobile Tunnel Monitoring System

Deformation Monitoring of Metro Tunnel with a New Ultrasonic-Based System

3D Monitoring Model for Real‐Time Displacement of Metro Tunnel under "Dual Carbon" Background

Tunnel Deformation Analysis Based on Lidar Points

Continuously Deformation Monitoring of Subway Tunnel Based on Terrestrial Point Clouds

3D Laser Scanning Acquisition and Modeling of Tunnel Engineering Point Cloud Data

Tunnel Reconstruction with Block Level Precision by Combining Data-Driven Segmentation and Model-Driven Assembly