Abstract:Piezoelectric energy harvesting from ambient vibration sources has great potential for powering microelectronic devices and wireless sensors. Almost all the conventional piezoelectric energy harvesters (CPEHs) in the literature have been designed with a single metallic layer as substrate along with the piezoelectric material bonded over it. In this work, a novel sandwich structure is used as substrate for designing harvester. The substrate structure comprises of a soft-core material sandwiched between metallic layers. The proposed sandwich piezoelectric energy harvester (SPEH) has lower resonant frequency and generates higher voltage output than the CPEH with the same geometrical dimension. Furthermore, the SPEH offers high design flexibility in terms of tuning the resonant frequency through selection of materials and geometric parameters for the core and metal layers. The mathematical formulation of a generalized electromechanical model of the SPEH is developed using the Lagrange approach. The natural frequencies, displacement and voltage frequency response functions of the harvester are obtained analytically. A single-degree-of-freedom model for the SPEH is also derived. Subsequently, the analytical modeling is validated by finite element simulations and experimental results. When excited at 0.1 g, the SPEH generates 18.8% more voltage output at resonance as compared with a CPEH with the same geometrical dimension and tip mass accompanied by 24% reduction in resonant frequency. At 30 Hz resonance frequency, CPEH generates open-circuit voltage 17.6 V using 15 g of tip mass whereas SPEH uses only 8.2 g of tip mass to generate 16.6 V.SPEH generates 130.8 mu W, 426.6 mu W and 1158.0 mu W at base accelerations 0.05 g, 0.1 g and 0.2 g with optimal resistance, respectively. Finally, the influence of geometric and material properties of core and metallic layers on the performance of SPEH are analyzed comprehensively. The proposed novel SPEH together with its analytical modeling is intended to serve as a basis for future sandwich harvester designs.

Evaluation And Verification Of Energy Recovery For Piezoelectric Vibration

Theoretical modeling and experimental verification of a broadband microvibrational energy harvesting system

Experimental study of a piezoelectric ring energy harvester

MODELING AND SIMULATION OF PIEZOELECTRIC MEMS ENERGY HARVESTING DEVICE

Evaluation Of Ring-Type Energy Harvesters

Uniform Stress Distribution of Bimorph by Arc Mechanical Stopper for Maximum Piezoelectric Vibration Energy Harvesting

Experiment and Validated Model for Vibration-Based Energy Conversion of a Horizontal Cantilever Beam from a Laminated Piezoelectric Composite Patch

Simulation, Manufacturing and Testing of Micro Piezoelectric Power Generator

Fabrication and Performance of MEMS-based Piezoelectric Power Generator for Vibration Energy Harvesting

Design and Optimization of Piezoelectric Cantilever Beam Vibration Energy Harvester

Design and Simulation of MEMS Piezoelectric Vibration Energy Harvesters with Center Mass Block

Investigation on the factors influencing the performance of piezoelectric energy harvester

Harvesting vibration energy using piezoelectric material: Modeling, simulation and experimental verifications

Bi-resonant Structure with Piezoelectric PVDF Films for Energy Harvesting from Random Vibration Sources at Low Frequency

Sandwich Piezoelectric Energy Harvester: Analytical Modeling and Experimental Validation

Investigation of Piezoelectric Energy Harvesting From Structural Vibration Induced by Rotating Machinery

Optimization of Geometry and Electrode Coverage of Trapezoidal Piezoelectric Energy Harvester for Specific Frequency

Dynamic Characteristics and Experimental Research of Linear-Arch Bi-Stable Piezoelectric Energy Harvester

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilevered in Piezoelectric Vibration Energy Harvester

Development of a High-Power Testing System for Piezoelectric Ceramic Material

Vibration Energy Conversion Power Supply Based on the Piezoelectric Thin Film Planar Array