Abstract:This paper presents a finite-element analysis (FEA) of the stress concentration factors (SCFs) of stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. The developed finite-element (FE) models include material non-linearities and are validated against corresponding experimental results available in the literature. The validated FE models were used to conduct an extensive parametric study comprising 324 FE models. The critical geometric parameters of the parametric study include: brace width-to-chord diameter ratio (beta(1) = b(1)/d(0)), brace-to-chord thickness ratio (tau = t(1)/t(0)), chord diameter-to-thickness ratio (2 gamma(1) = d(0)/t(0)), brace diameter-to-chord width ratio (beta(2) = d(1)/b(0)), chord width-to thickness ratio (2 gamma(2) = b(0)/t(0)), eccentricity (e), gap distance (g) of K-joints with gap, and overlap ratio (O-v) of overlapped K-joints. The results of the parametric study show that the effect of beta on the SCF varies for different types of K-joints. For all hybrid tubular K-joints, the values of SCFs increases with an increase in 2 gamma value. For gapped K-joints, the values of SCFs increases with an increase in e value. An attempt was made to compare the numerical results against the SCFs calculated in accordance with International Committee for the Development and Study of Tubular Structures (CIDECT) (2001) for both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. This comparison reveals how the design equations available in CIDECT (2001) for pure circular and square tubular joints are not suitable for predicting the SCFs of both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. Therefore, improved design equations are proposed in this paper for predicting accurately the SCFs of stainless steel hybrid tubular K-joints with square braces and circular chord, as well as circular braces and square chord.

Numerical Study Of Stainless Steel Circular Hollow Section Tubular T-Joints

NUMERICAL STUDY OF STAINLESS STEEL CIRCULAR HOLLOW SECTION TUBULAR JOINTS

Numerical Study of Hybrid Tubular K-joints with Circular Braces and Square Chord in Stainless Steel

Finite-element Analysis and Design of Stainless-Steel CHS-to-SHS Hybrid Tubular Joints under Axial Compression

Experimental study of the static behavior of tubular N-joints

Experimental Investigation of Cold-Formed Stainless Steel Tubular T-Joints

Experimental and numerical study on static behaviour of uniplanar CFDST-CHS T-joints

Numerical Investigation and Design Rules for Stress Concentration Factors of Stainless-Steel Hybrid Tubular Joints

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Tests of CHS-to-SHS Tubular Connections in Stainless Steel

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Finite element modelling and proposed design rules of stainless steel hybrid tubular joints with square braces and circular chord

An Experimental Study on Stainless Steel Hybrid Tubular Joints with Square Braces and Circular Chord

Design of concrete filled tubular CHS T-joints under in-plane bending

Finite Element Analysis of Cold-Formed Stainless Steel Tubular T-Joints at Elevated Temperatures

A Numerical Study and Proposed Design Rules for Stress Concentration Factors of Stainless Steel Hybrid Tubular K-joints

Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS

Behaviour of Grouted Stainless Steel Tubular X-joints with CHS Chord under Axial Compression

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Design of Concrete-Filled Stainless Steel Tubular Connections

Tests of concrete-filled stainless steel tubular T-joints