Abstract:Multi-fidelity simulations for the design point or equilibrium lines of aeroengines are implemented using fully coupled methods, simultaneously optimizing computational resources and speed. Fully coupled methods remove the requirement of characteristic maps by directly incorporating computational fluid dynamics models of subcomponents into the thermodynamic model of an aeroengine. However, poor convergence remains an urgent problem for fully coupled methods, particularly when performing multi-fidelity simulations in the near-boundary region. In response to this challenge, an auxiliary fully coupled method was developed in this study. This auxiliary method introduces parametric a priori knowledge and auxiliary coordinate transformations into the existing direct fully coupled method. An automated multi-fidelity simulation platform was established in-house and validated using the KJ66 turbojet engine. The simulation results of the equilibrium line were then compared with experimental data to validate the high accuracy and reliability of the multi-fidelity simulation. Moreover, two fundamental selection schemes for matching parameters (mass flow or static pressure, transferred between the computational fluid dynamics and thermodynamic models) were implemented and systematically compared. The results demonstrate that the adaptive selection of matching parameters extends the application of multi-fidelity simulations to a broader operation range. In addition, the auxiliary fully coupled method was applied to a multi-fidelity simulation of a wider operation range, such as an adjustable nozzle area and variable power extraction. It was also compared with the existing direct fully coupled method with respect to the stable convergence scope. For the mass-flow matching scheme, the maximum stable convergence scope of the direct method was extended from 105% to 315% by the auxiliary method. For the static-pressure matching scheme, the auxiliary method also broadened the maximum stable convergence scope of the direct method from 55% to 190%. The comparison reveals that the auxiliary fully coupled method exhibits a wider range of far-off-design conditions, including the near-boundary region.

Numerical Investigations Of The Jaxa High-Lift Configuration Standard Model With Mflow Solver

Experimental Validation of Nonlinear Coupled Constitutive Relations in Continuum Flows

Computation of Hypersonic Flows over Flying Configurations Using a Nonlinear Constitutive Model

Unsteady Flow Simulation of a Variable-Sweep Morphing Aircraft Coupled with Flight Control System

Numerical Investigation on Local Non-equilibrium Flows Using a Diatomic Nonlinear Constitutive Model

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

Numerical Simulation of Hypersonic Thermochemical Nonequilibrium Flows Using Nonlinear Coupled Constitutive Relations

A Three-Dimensional Finite Volume Method for Conservation Laws in Conjunction with Modified Solution for Nonlinear Coupled Constitutive Relations

Computation of Hypersonic Transitional Flows Over Cones Using Gas-Kinetic Scheme Coupled with the Turbulence Model

An Improved CIP-based Numerical Model for Simulating Free-Surface Flow with Adaptive Mesh

Numerical Investigation on Aerodynamic Characteristics of an Active Jets-Matrix Serving as Pitch Control Surface

Combination of Advanced Actuator Line/Disk Model and High-Order Unstructured Finite Volume Solver for Helicopter Rotors

Development of three-dimensional rotated lattice Boltzmann flux solver for the simulation of high-speed compressible flows

Aerodynamic Prediction of a CRM High-lift Configuration using a modified three equation turbulence mode

Aerodynamic Prediction of High-Lift Configuration Using K−v2¯−ω Turbulence Model

Numerical Simulation for Transonic Flows at High Incidence Around a Complete Fighter with Two-Equation K-G Model

F-16XL Hybrid Reynolds-Averaged Navier-Stokes/Large Eddy Simulation on Unstructured Grids

Aerodynamic Prediction of the High-Lift Common Research Model with Modified Turbulence Model

Grid Convergence Study on a Finite Volume Code NSAWET

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Multi-fidelity Simulation of Aeroengine across Wide Operation Range using Auxiliary Fully Coupled Method