Abstract:It is vital to output the required electrical power following various task requirements when the space reactor power supply is operating in orbit. The dynamic performance of the closed Brayton cycle thermoelectric conversion system is initially studied and analyzed. Based on this, a load tracking power regulation method is developed for the liquid metal cooled space reactor power system, which takes into account the inlet temperature of the lithium on the hot side of the intermediate heat exchanger, the filling quantity of helium and xenon, and the input amount of the heat pipe radiator module. After comparing several methods, a power regulation method with fast response speed and strong system stability is obtained. Under various changes in power output, the dynamic response characteristics of the ultra -small liquid metal lithium -cooled space reactor concept scheme are analyzed. The transient operation process of 70 % load power shows that core power variation is within 30 % and core coolant temperature can operate at the set safety temperature. The second loop's helium -xenon working fluid has a 65K temperature change range and a 25 % filling quantity. The lithium at the radiator loop outlet changes by less than +/- 7 K, and the system's main key parameters change as expected, indicating safety. The core system uses less power during 30 % load power transient operation. According to the response characteristics of various system parameters, under low power operation conditions, the lithium working fluid temperature of the radiator circuit and the high -temperature heat pipe operation temperature are limiting conditions for low -power operation, and multiple system parameters must be coordinated to ensure that the radiator system does not condense the lithium working fluid and the heat pipe.

Thermodynamic Performance Of 5mw Space Nuclear Power System Based On Liquid Metal Rankine Cycle

Thermodaynamic Analysis of Space Nuclear Power System Based on Liquid Metal Rankine Cycle

Thermodynamic and Mass Analysis of a Novel Two-Phase Liquid Metal MHD Enhanced Energy Conversion System for Space Nuclear Power Source

Thermodynamic analysis of potassium Rankine cycle in space nuclear power by energy analysis and exergy analysis

Study on Load Tracking Characteristics of Closed Brayton Conversion Liquid Metal Cooled Space Nuclear Power System

Dynamic simulation of a space lithium-cooled reactor system coupled with a He–Xe closed Brayton cycle

Energy Allocation Optimization of the Gas-Cooled Space Nuclear Reactor

Optimization of thermodynamic performance and mass evaluation for MW-class space nuclear reactor coupled with noble gas binary mixtures Brayton cycle

Preliminary Design and Neutronic Analysis of Prismatic High Temperature Gas-cooled Space Nuclear Reactor

Optimizing Analysis of Thermodynamic Performance Optimizing Analysis of Stirling Conversion System for Space Nuclear Power Installation

Study on Thermodynamic Performance of Nuclear Power Propulsion System in Spacecraft

Performance Evaluation and Efficiency Enhancement of a Space Thermionic Fuel Element for Thermal Energy Conversion and Utilization

Effect of Cooling Schemes on Performance of MW-class Space Nuclear Closed Brayton Cycle

Thermodynamic Performance of an Innovative Space Nuclear Brayton Cycle with S–N2O

Thermodynamic Analysis of a Brayton Cycle System for a Space Power Reactor

Operation and Safety Analysis of Space Lithium-Cooled Fast Nuclear Reactor

Conceptual Design for a 5 Kwe Space Nuclear Reactor Power System

Thermodynamic performance of an innovative space nuclear Brayton cycle with S–N 2 O

Conceptual Design of Megawatt Class Space Heat Pipe Reactor Power System

Performance Analysis and Optimization of Heat Pipe-Based Radiator for Space Fission Power System Thermal Management

Thermoelectric Conversion Performance of Combined Thermoions System for Space Nuclear Power Supply