Abstract:Small nuclear power plants can provide a stable, carbon-free energy supply to civil infrastructure and industrial enterprises in remote regions isolated from unified energy systems. More than 70 projects of small modular reactors are currently being developed by IAEA member countries; several low-power power units are already supplying thermal and electrical energy to consumers. One of the main limitations standing in the way of widespread dissemination of this technology is the high specific capital cost of a low-power nuclear power plant; therefore, new scientific and technical solutions are needed in this industry. Increasing the thermodynamic efficiency of power cycles of small modular reactors can become a driver for reducing the cost of supplied electrical energy. This paper presents the results of a comprehensive thermodynamic analysis of existing and promising power cycles for small modular reactors. In addition to traditional steam power cycles, cycles using non-traditional working fluids, including carbon dioxide, freons, and helium cycles, are considered. Optimal sets of thermodynamic parameters were determined to ensure maximum net efficiency of electricity production. For water-cooled reactor plants, a maximum efficiency of 33.5% at an initial temperature of 300 °C could be achieved using a steam turbine cycle. It was revealed that for reactor plants with liquid metal and liquid salt coolant in the range of initial temperatures above 550–700 °C, the maximum thermal efficiency was provided by the Brayton recompression cycle with a carbon dioxide coolant: the net electrical efficiency exceeded the level of steam turbine plants, with intermediate superheating of the steam, and could reach a value of 49.4% at 600 °C. This makes the use of these cycles promising for low-power nuclear power plants with a high initial temperature. In small gas-cooled reactor plants with a helium coolant, the use of a binary cycle consisting of a helium Brayton cycle and a steam-powered Rankine cycle provided an efficiency of 44.3% at an initial helium temperature of 700 °C and 52.9% at 1000 °C. This was higher than in the Brayton cycle with a recuperator, with a minimum temperature difference in the heat exchanger of 20 °C: the efficiency was 40.2% and 52%, respectively. Also, the transition to power cycles with non-traditional working fluids will lead to a change in the operating conditions of turbomachines and heat exchangers.

Thermodynamic analysis of potassium Rankine cycle in space nuclear power by energy analysis and exergy analysis

Comprehensive Analysis on Suitability of Alkali Metals with High Enthalpy Characteristics for Space Nuclear Rankine Cycle

Thermal-economic-weight assessment of the potassium – Tetradecamethyl hexasiloxane binary coupled Rankine cycle system in space power station

Thermodaynamic Analysis of Space Nuclear Power System Based on Liquid Metal Rankine Cycle

Parameters Analysis and Techno-Economic Comparison of Various ORCs and Sco2 Cycles As the Power Cycle of Lead–Bismuth Molten Nuclear Micro-Reactor

Study on Thermodynamic Performance of Nuclear Power Propulsion System in Spacecraft

Thermodynamic Performance Of 5mw Space Nuclear Power System Based On Liquid Metal Rankine Cycle

Optimizing Analysis of Thermodynamic Performance Optimizing Analysis of Stirling Conversion System for Space Nuclear Power Installation

Thermoelectric Conversion Performance of Combined Thermoions System for Space Nuclear Power Supply

Thermodynamic Analysis and Optimization of Binary CO2-Organic Rankine Power Cycles for Small Modular Reactors

Thermodynamic Analysis and Comparison of Power Cycles for Small Modular Reactors

Thermal-hydraulic analysis of the thermoelectric space reactor power system with a potassium heat pipe radiator

Thermodynamic Analysis of a Brayton Cycle System for a Space Power Reactor

Conceptual Design and Parametric Study of Combined Carbon Dioxide/organic Rankine Cycles

Optimization of a Recompression Supercritical Nitrous Oxide and Helium Brayton Cycle for Space Nuclear System

Thermodynamic analysis and optimization of the combined supercritical carbon dioxide Brayton cycle and organic Rankine cycle‐based nuclear hydrogen production system

Thermodynamic Analysis of A Low-Temperature Organic Rankine Cycle Power Plant Operating at Off-Design Conditions

Thermodynamic Performance of an Innovative Space Nuclear Brayton Cycle with S–N2O

Thermodynamic And Economic Analysis Of Reheat Transcritical Organic Rankine Power Cycle Using A Low Temperature Geothermal Heat Source

Theoretical Analysis of A Thermodynamic Cycle for Power and Heat Production Using Supercritical Carbon Dioxide

Thermodynamic performance of an innovative space nuclear Brayton cycle with S–N 2 O